Hi all, For anyone looking for a light-weight open-source UI for the SV06 ACE, I found that Guppy Screen GitHub - ballaswag/guppyscreen: A native Touch UI for 3D Printers running Klipper/Moonraker. is working pretty much out-of-the-box when installed using their Debian installer. The only issue I’…

It’s great that it seems to work on the SV06 Plus ACE as well. After the problem with the original interface and the camera’s LED pin, this could be a solution. Just recently, an installation for KlipperScreen was shown in the forum. That makes me wonder about the differences or advantages. Perhaps …

Very nice! I was actually thinking to try this soon, and it’s great to have an example to start from. As for how they differ, GuppyScreen is lighter weight. I believe it uses LVGL to draw to the Linux framebuffer directly (a common approach on embedded devices), whereas KlipperScreen expects an X s…

BTW, there is a fork of GuppyScreen I think may be more recently / actively maintained: GitHub - probielodan/guppyscreen: A native Touch UI for 3D Printers running Klipper/Moonraker. . Might be able to upstream your installation script there, as they already have a couple of different printers suppo…

Thanks for the info! Competition is good for business. I’m not tied to KlipperScreen. If something is better, I’m always happy to try it.

That’s fantastic! I was actually a bit skeptical of the fact that the last commit was from ~1.5 years ago, so that’s good to know that there is a fork with more recent maintenance. I will update my script to use that as a source and hopefully it will work just as well :slight_smile: By upstream btw…

I only tried Klipper Screen very briefly, so function wise I can’t really say which one is better. Based off their respective github repo, however, I would image Klipper Screen to be more mature in that sense. However as @bcat was saying, the main benefit of it is really that it is much more light…

Installation script for Guppy Screen on SV06 ACE

Sovol SV06 ACE

Oliver February 3, 2026, 3:40pm 8

Thanks for the pictures! That helps me visualize it much better. I’m currently testing Knomi from Bigtreetech with the SV06 Plus ACE. It’s connected to the printer via Wi-Fi only. It’s a small status indicator with a lot of potential.

Topic		Replies	Views
KlipperScreen for Sovol SV06 Ace Sovol SV06 ACE firmware , klipper	18	699	September 11, 2026
SV06 ACE GUI Klipperscreen replacement? Sovol SV06 ACE	2	388	March 2, 2025
SV06 Klipper Screen Wifi not working Sovol SV06 Fully Open Source 3D Printer advice	0	479	October 22, 2023
Any display connected to the HDMI output? Sovol SV08 MAX	16	538	March 5, 2026
Display modification Sovol SV06 ACE	2	399	February 19, 2025

Installation script for Guppy Screen on SV06 ACE

Related topics