# \#uneven-bed

**URL:** https://forum.sovol3d.com/tag/uneven-bed/43.md

[Latest](https://forum.sovol3d.com/latest.md) · [Categories](https://forum.sovol3d.com/categories.md) · [Tags](https://forum.sovol3d.com/tags.md)

---

## [My Bed Mesh is not compensating for the bed offsets](https://forum.sovol3d.com/t/my-bed-mesh-is-not-compensating-for-the-bed-offsets/10029)

<div class="topic-metadata">

**Author:** [@DDeGagne](https://forum.sovol3d.com/u/DDeGagne)\
**Replies:** 4\
**Last updated:** [May 21, 2026, 8:17pm UTC](https://forum.sovol3d.com/t/my-bed-mesh-is-not-compensating-for-the-bed-offsets/10029 "2026-05-21T20:17:42Z")

</div>

So my bed is not flat. No surprise. But the problem is the bed mesh, which is supposed to compensate for that is not working. I’ve been through the configurations, and they all seem right. Any suggestions? As you can…

---

## [Tilted bed advice](https://forum.sovol3d.com/t/tilted-bed-advice/6697)

<div class="topic-metadata">

**Author:** [@Loustoc](https://forum.sovol3d.com/u/Loustoc)\
**Replies:** 3\
**Last updated:** [January 25, 2025, 4:46pm UTC](https://forum.sovol3d.com/t/tilted-bed-advice/6697 "2025-01-25T16:46:29Z")

</div>

Hey guys, complete beginner here. Got my brand new SV06 ACE this week, it’s been printing small objects like a charm, but trying to print the first bigger one made a bit of a mess. I checked the bed mesh and got this (se…

---

## [SV05 print bed has a 0.237 mm tolerance](https://forum.sovol3d.com/t/sv05-print-bed-has-a-0-237-mm-tolerance/689)

<div class="topic-metadata">

**Author:** [@Markus](https://forum.sovol3d.com/u/Markus)\
**Replies:** 6\
**Last updated:** [February 17, 2023, 4:19pm UTC](https://forum.sovol3d.com/t/sv05-print-bed-has-a-0-237-mm-tolerance/689 "2023-02-17T16:19:59Z")

</div>

Hi Sovol, is this normal for a new SV05 printer? Btw, klipper runs nicely on the printer :wink: Best regards, Markus