# \#extruder-kit **URL:** https://forum.sovol3d.com/tag/extruder-kit/35.md [Latest](https://forum.sovol3d.com/latest.md) · [Categories](https://forum.sovol3d.com/categories.md) · [Tags](https://forum.sovol3d.com/tags.md) --- ## [Sovol Sv04 newbie! Nozzles crashing into each other.. help](https://forum.sovol3d.com/t/sovol-sv04-newbie-nozzles-crashing-into-each-other-help/10239)
**Author:** [@Froggygirl01](https://forum.sovol3d.com/u/Froggygirl01)\ **Replies:** 6\ **Last updated:** [August 13, 2026, 3:29pm UTC](https://forum.sovol3d.com/t/sovol-sv04-newbie-nozzles-crashing-into-each-other-help/10239 "2026-08-13T15:29:29Z")
Ok so we just bought the sv04 off a college kid I. Town… no books on it and we r new to this machine. We have a Bambu A-1 with no issues. I think I got the leveling fixes using you tube to figure that out but now when we… --- ## [Sovol Zero – under-extrusion caused by worn extruder gear (Solution update - loose pin)? Need advice on replacement](https://forum.sovol3d.com/t/sovol-zero-under-extrusion-caused-by-worn-extruder-gear-solution-update-loose-pin-need-advice-on-replacement/9679)
**Author:** [@AlexLu](https://forum.sovol3d.com/u/AlexLu)\ **Replies:** 7\ **Last updated:** [July 15, 2026, 2:10am UTC](https://forum.sovol3d.com/t/sovol-zero-under-extrusion-caused-by-worn-extruder-gear-solution-update-loose-pin-need-advice-on-replacement/9679 "2026-07-15T02:10:33Z")
Hi everyone, My Sovol Zero recently started printing very inconsistently. I’m getting clear under-extrusion — layers are thin, gaps appear, and prints fail. Here’s what I’ve already tried: different filaments noz… --- ## [Multi-filament adapter for SV01](https://forum.sovol3d.com/t/multi-filament-adapter-for-sv01/9902)
**Author:** [@pjamesnorris](https://forum.sovol3d.com/u/pjamesnorris)\ **Replies:** 9\ **Last updated:** [April 30, 2026, 3:08pm UTC](https://forum.sovol3d.com/t/multi-filament-adapter-for-sv01/9902 "2026-04-30T15:08:01Z")
Is there a multi-filament adapter compatible with the SV01? I believe the 3D Chameleon was, but it would appear they’re no longer in business. Thank you, P. James Norris --- ## [Cant extrude on sovol sv07](https://forum.sovol3d.com/t/cant-extrude-on-sovol-sv07/9526)
**Author:** [@Bantingbintang](https://forum.sovol3d.com/u/Bantingbintang)\ **Replies:** 1\ **Last updated:** [February 7, 2026, 6:25am UTC](https://forum.sovol3d.com/t/cant-extrude-on-sovol-sv07/9526 "2026-02-07T06:25:45Z")
I’ve tried disassembling the filament feeder, but the filament is worn away by the feeder’s gears. I tried pushing the stuck filament at the point marked with the red arrow, but it’s very hard, even when using the includ… --- ## [Ace toolhead on Mainline Klipper](https://forum.sovol3d.com/t/ace-toolhead-on-mainline-klipper/7585)
**Author:** [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Replies:** 6\ **Last updated:** [February 4, 2026, 9:25am UTC](https://forum.sovol3d.com/t/ace-toolhead-on-mainline-klipper/7585 "2026-02-04T09:25:39Z")
Is anyone running mainline klipper on their Ace? I’m considering adapting an Ace toolhead to another Klipper printer specifically for the “touch to Zero” Z offset function. As far as I can tell \[kx711\] is a custom f… --- ## [Unable to read tmc uart ‘extruder’ register IFCNT](https://forum.sovol3d.com/t/unable-to-read-tmc-uart-extruder-register-ifcnt/9007)
**Author:** [@Walimang](https://forum.sovol3d.com/u/Walimang)\ **Replies:** 5\ **Last updated:** [November 14, 2025, 3:32am UTC](https://forum.sovol3d.com/t/unable-to-read-tmc-uart-extruder-register-ifcnt/9007 "2025-11-14T03:32:56Z")
Do I need a new board? I have re-seated all the wires but still encountering this issue. This was after a clog issue where I heated the hotend to 300 degrees. I was then able to successfully run the calibrate z-offset. N… --- ## [SV07 Plus full extruder replacement?](https://forum.sovol3d.com/t/sv07-plus-full-extruder-replacement/8611)
**Author:** [@Dobrodrummer](https://forum.sovol3d.com/u/Dobrodrummer)\ **Replies:** 8\ **Last updated:** [September 25, 2025, 10:02pm UTC](https://forum.sovol3d.com/t/sv07-plus-full-extruder-replacement/8611 "2025-09-25T22:02:33Z")
I was finishing a print after switching a filament when it melted and got stuck to the extruder. I read to heat the extruder and bed a bit higher, which let me raise the gantry and pull the melted filament off the extru… --- ## [Sprite Pro Extruders (swap)](https://forum.sovol3d.com/t/sprite-pro-extruders-swap/8035)
**Author:** [@aPpYe](https://forum.sovol3d.com/u/aPpYe)\ **Replies:** 10\ **Last updated:** [June 17, 2025, 3:31pm UTC](https://forum.sovol3d.com/t/sprite-pro-extruders-swap/8035 "2025-06-17T15:31:29Z")
I’m running into a couple of issues and hoping someone with experience can help. As far as I can tell, my wiring matches what others have done. I’ve correctly soldered the part cooling fan and heater block wiring for b… --- ## [Just upgraded (successfully) SV04 Extruder E1 (Right Extruder) with Creality Sprite Pro](https://forum.sovol3d.com/t/just-upgraded-successfully-sv04-extruder-e1-right-extruder-with-creality-sprite-pro/4004)
**Author:** [@Wiriza01](https://forum.sovol3d.com/u/Wiriza01)\ **Replies:** 9\ **Last updated:** [June 2, 2025, 7:33pm UTC](https://forum.sovol3d.com/t/just-upgraded-successfully-sv04-extruder-e1-right-extruder-with-creality-sprite-pro/4004 "2025-06-02T19:33:28Z")
Easy upgrade but would be easier if Solvol sold a 20$ new mount/bracket. Otherwise plug and play and solder / spice into Heat and Fan. Firstly the reason for the upgrade was with failing to print a two different brands… --- ## [Sovol SV07 Extruder Problems](https://forum.sovol3d.com/t/sovol-sv07-extruder-problems/7247)
**Author:** [@bobmino](https://forum.sovol3d.com/u/bobmino)\ **Replies:** 3\ **Last updated:** [April 1, 2025, 12:23am UTC](https://forum.sovol3d.com/t/sovol-sv07-extruder-problems/7247 "2025-04-01T00:23:41Z")
So my Sovol sv07 is having some issues, when I start printing a ring (I marked it in red) on the extruder just starts shaking and not spinning and it doesn’t print because of that, but when I manually extrude with the Kl… --- ## [SV06 Plus Extruder motor not working](https://forum.sovol3d.com/t/sv06-plus-extruder-motor-not-working/6335)
**Author:** [@Jaysens](https://forum.sovol3d.com/u/Jaysens)\ **Replies:** 1\ **Last updated:** [December 22, 2024, 6:57pm UTC](https://forum.sovol3d.com/t/sv06-plus-extruder-motor-not-working/6335 "2024-12-22T18:57:01Z")
Hey guys, just bought a used SV06 plus with Sovol Klipperpad and everything is working…except of the Extruder motor. Everything else at the printhead is recognized by the system (and gets error messages when disconected… --- ## [SV04 Replacement Drive Gear](https://forum.sovol3d.com/t/sv04-replacement-drive-gear/5479)
**Author:** [@Zzyzxx71](https://forum.sovol3d.com/u/Zzyzxx71)\ **Replies:** 0\ **Last updated:** [August 11, 2024, 5:48pm UTC](https://forum.sovol3d.com/t/sv04-replacement-drive-gear/5479 "2024-08-11T17:48:35Z")
Greetings, others have posted regarding this as well - Is there a way to purchase only the extruder drive gear for a SV04, or an aftermarket option? I’ve found 1 that looks close however others have said the teeth don’t … --- ## [SV06 Plus heatbreak issue](https://forum.sovol3d.com/t/sv06-plus-heatbreak-issue/5052)
**Author:** [@EzraB](https://forum.sovol3d.com/u/EzraB)\ **Replies:** 0\ **Last updated:** [May 22, 2024, 1:33am UTC](https://forum.sovol3d.com/t/sv06-plus-heatbreak-issue/5052 "2024-05-22T01:33:49Z")
So, I have a few issues. I swapped my nozzle when I found a leak. I decided to take off the hotend and the heatbreak stayed in the extruder. This isn’t a big deal, I could just get a new extruder, but two of the thre… --- ## [How to remove glued in heatbreak from the extruder?](https://forum.sovol3d.com/t/how-to-remove-glued-in-heatbreak-from-the-extruder/2848)
**Author:** [@Strong](https://forum.sovol3d.com/u/Strong)\ **Replies:** 4\ **Last updated:** [October 2, 2023, 3:02am UTC](https://forum.sovol3d.com/t/how-to-remove-glued-in-heatbreak-from-the-extruder/2848 "2023-10-02T03:02:45Z")
When i tried printing with my svo6 plus i got a blob of death but at the heatbreak not the nozzle, when i cleaned it up i realized somehow my heatbreak snapped. I took the entire nozzle assembly off and now i have half … --- ## [Extruder Auto-Cooling Fans Sovol SV06](https://forum.sovol3d.com/t/extruder-auto-cooling-fans-sovol-sv06/1727)
**Author:** [@Pilou](https://forum.sovol3d.com/u/Pilou)\ **Replies:** 9\ **Last updated:** [August 16, 2023, 3:48pm UTC](https://forum.sovol3d.com/t/extruder-auto-cooling-fans-sovol-sv06/1727 "2023-08-16T15:48:08Z")
Umm, could it be that “Extruder Auto-Cooling Fans” is deactivated in Marlin? It’s bothering me that the extruder fan doesn’t turn off automatically after printing. In the source code, there seems to be only the pin for … --- ## [Warranty - new extruder?](https://forum.sovol3d.com/t/warranty-new-extruder/2608)
**Author:** [@bbenston](https://forum.sovol3d.com/u/bbenston)\ **Replies:** 5\ **Last updated:** [June 17, 2023, 10:16pm UTC](https://forum.sovol3d.com/t/warranty-new-extruder/2608 "2023-06-17T22:16:09Z")
Hello – I ordered a SV06 Plus recently (Order #32149), and have been having a lot of fun with it. However, I recently got a giant blob of filament, wrapped around the entire print head and the thermistor wiring. I tried… --- ## [Sv01 pro index](https://forum.sovol3d.com/t/sv01-pro-index/2644)
**Author:** [@Jasoncox](https://forum.sovol3d.com/u/Jasoncox)\ **Replies:** 0\ **Last updated:** [May 21, 2023, 5:38pm UTC](https://forum.sovol3d.com/t/sv01-pro-index/2644 "2023-05-21T17:38:28Z")
I have the sv01 pro and i have to replace the index/ extruder, the sv04 index works but gives option for right and left handed. Dose anyone know which one i need for it ? in U.S. if that matters. --- ## [Need a new bed](https://forum.sovol3d.com/t/need-a-new-bed/2228)
**Author:** [@Corne-1981](https://forum.sovol3d.com/u/Corne-1981)\ **Replies:** 20\ **Last updated:** [April 12, 2023, 10:48pm UTC](https://forum.sovol3d.com/t/need-a-new-bed/2228 "2023-04-12T22:48:22Z")
So my bed died on friday tried to repair it. it heats up but the pla won’t stick after the second layer. Gues i just need a new bed. --- ## [Replacement extruder gear](https://forum.sovol3d.com/t/replacement-extruder-gear/1549)
**Author:** [@sovol3delger](https://forum.sovol3d.com/u/sovol3delger)\ **Replies:** 12\ **Last updated:** [April 4, 2023, 11:37am UTC](https://forum.sovol3d.com/t/replacement-extruder-gear/1549 "2023-04-04T11:37:26Z")
Hi @sovol3d , It looks like my extruder gear has failed. What should I get to replace it and how…? Thanks --- ## [Thermistor failed main board](https://forum.sovol3d.com/t/thermistor-failed-main-board/1875)
**Author:** [@Leeroy](https://forum.sovol3d.com/u/Leeroy)\ **Replies:** 2\ **Last updated:** [March 3, 2023, 8:03pm UTC](https://forum.sovol3d.com/t/thermistor-failed-main-board/1875 "2023-03-03T20:03:02Z")
hopefully someone can help me out on this one my Phil lament was sticking and not extruding so i pulled it apart but now when i turn on the machine it says Thermistor Error (Max/Min Temp) ! power cycle required! wrong …