# Zero will Ship With Chamber Heater In Future?

**URL:** <https://forum.sovol3d.com/t/zero-will-ship-with-chamber-heater-in-future/7420>\
**Category:** Sovol Zero\
**Created:** [April 5, 2025, 6:01pm UTC](https://forum.sovol3d.com/t/zero-will-ship-with-chamber-heater-in-future/7420 "2025-04-05T18:01:38Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![robotwizard](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@robotwizard](https://forum.sovol3d.com/u/robotwizard)\
**Post date:** [April 5, 2025, 6:01pm UTC](https://forum.sovol3d.com/t/zero-will-ship-with-chamber-heater-in-future/7420/1 "2025-04-05T18:01:38Z")

</div>

If I understand Sovol website correctly, the zeros are currently not shipping with chamber heaters but will in the future? If this is true then when?? Any thoughts?

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [April 5, 2025, 9:16pm UTC](https://forum.sovol3d.com/t/zero-will-ship-with-chamber-heater-in-future/7420/2 "2025-04-05T21:16:06Z")

</div>

No.  
During the live stream they said because of the small size a chamber heater wasn’t needed.

**EDIT:** here is the link to the Chamber Heater.

> **[Chamber Heating Module for Zero](https://www.sovol3d.com/products/zero-chamber-heater)**
>
> Built for high-temperature 3D printing, this Chamber Heating Module supports advanced filaments like ABS, ASA, and PA/PC by ensuring a stable environment for flawless, uniform print quality.

---

<div class="post-metadata">

**Author:** ![robotwizard](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@robotwizard](https://forum.sovol3d.com/u/robotwizard)\
**Post date:** [April 6, 2025, 6:06am UTC](https://forum.sovol3d.com/t/zero-will-ship-with-chamber-heater-in-future/7420/3 "2025-04-06T06:06:59Z")

</div>

Thanks for the info.

---

<div class="post-metadata">

**Author:** ![JLG2117](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/jlg2117/32/3237_2.png) [@JLG2117](https://forum.sovol3d.com/u/JLG2117)\
**Post date:** [April 8, 2025, 6:09pm UTC](https://forum.sovol3d.com/t/zero-will-ship-with-chamber-heater-in-future/7420/4 "2025-04-08T18:09:46Z")

</div>

On one of the reviews of the Zero on YouTube, they saw the chamber get up to around 50C using the bed heater. That is probably OK for all regular kinds of ABS and ASA. But I’m sure users will do more testing and we’ll see how well it works in general.