# Zero 4.3" LCD mount

**URL:** <https://forum.sovol3d.com/t/zero-4-3-lcd-mount/7980>\
**Category:** Cool Prints & STL Share\
**Created:** [June 4, 2025, 7:11am UTC](https://forum.sovol3d.com/t/zero-4-3-lcd-mount/7980 "2025-06-04T07:11:19Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bircoe](https://avatars.discourse-cdn.com/v4/letter/b/a3d4f5/32.png) [@bircoe](https://forum.sovol3d.com/u/bircoe)\
**Post date:** [June 4, 2025, 7:11am UTC](https://forum.sovol3d.com/t/zero-4-3-lcd-mount/7980/1 "2025-06-04T07:11:19Z")

</div>

I posted this on the Facebook group but thought I’d share it here too.

I designed a side mount and case for a Waveshare 4.3" LCD that uses 2 existing screws for the side panel, I tried to mount it in the original LCD location but even with a 25 degree angle and heavily chamfered case edge I couldn’t get it to clear the door, a 3.5" may fit but I think that’s getting a bit too small.

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/f/fb4bb25ca54bbb1127326999e0231f5495524658.jpeg)

> **[Sovol Zero 4.3inch LCD Enclosure and Mount by M P | Download free STL model |...](https://www.printables.com/model/1314615-sovol-zero-43inch-lcd-enclosure-and-mount)**
>
> Enclosure and bracket for mounting a Waveshare 4.3" HDMI LCD to a Sovol Zero using existing screws and screw holes. | Download free 3D printable STL models

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [June 4, 2025, 11:51am UTC](https://forum.sovol3d.com/t/zero-4-3-lcd-mount/7980/2 "2025-06-04T11:51:42Z")

</div>

Every Mod helps, thanks.