# Z calibration buggy

**URL:** <https://forum.sovol3d.com/t/z-calibration-buggy/2747>\
**Category:** Sovol SV06 Plus\
**Created:** [June 3, 2023, 3:07pm UTC](https://forum.sovol3d.com/t/z-calibration-buggy/2747 "2023-06-03T15:07:01Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [June 3, 2023, 9:37pm UTC](https://forum.sovol3d.com/t/z-calibration-buggy/2747/2 "2023-06-03T21:37:59Z")

</div>

Do steps 1, 2 & 3…then level the bed & click save…your done…(do not re-set the Z offset)  
The nozzle will always be off the bed until you start your print.

---

_[View the full topic](https://forum.sovol3d.com/t/z-calibration-buggy/2747)._