# Z-axis

**URL:** <https://forum.sovol3d.com/t/z-axis/2789>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [June 8, 2023, 3:21pm UTC](https://forum.sovol3d.com/t/z-axis/2789 "2023-06-08T15:21:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bobinski53](https://avatars.discourse-cdn.com/v4/letter/b/a698b9/32.png) [@Bobinski53](https://forum.sovol3d.com/u/Bobinski53)\
**Post date:** [June 8, 2023, 3:21pm UTC](https://forum.sovol3d.com/t/z-axis/2789/1 "2023-06-08T15:21:32Z")

</div>

Wh r  
When homing z-axis is below bedplate