# Your opinion about KIT KLIPPER?

**URL:** <https://forum.sovol3d.com/t/your-opinion-about-kit-klipper/6143>\
**Category:** Sovol SV06 Plus\
**Created:** [December 2, 2024, 11:35am UTC](https://forum.sovol3d.com/t/your-opinion-about-kit-klipper/6143 "2024-12-02T11:35:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![DU4FDR](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/du4fdr/32/1181_2.png) [@DU4FDR](https://forum.sovol3d.com/u/DU4FDR)\
**Post date:** [December 2, 2024, 11:35am UTC](https://forum.sovol3d.com/t/your-opinion-about-kit-klipper/6143/1 "2024-12-02T11:35:11Z")

</div>

Hello,  
What is your opinion about using the KLIPPER KIT for the SV06 PLUS?

- LCD screen usage
- print performance
- print quality
- the gain in time
- the disadvantages if they are major  
thank you for your answer because I want to install the KIT Klipper  
a+ Francis

---

<div class="post-metadata">

**Author:** ![wrusman](https://avatars.discourse-cdn.com/v4/letter/w/8dc957/32.png) [@wrusman](https://forum.sovol3d.com/u/wrusman)\
**Post date:** [December 2, 2024, 1:43pm UTC](https://forum.sovol3d.com/t/your-opinion-about-kit-klipper/6143/2 "2024-12-02T13:43:08Z")

</div>

The screen usage is ok.  
The print performance has gone up a little but you will need additional cooling to get nice and fast prints.

The usage is a bit wobbly (not really unstable) in the first start-ups with mainsail disconnect screens etc, but I think it takes getting used to. Don’t expect miracles though, if you want customization go for a Raspi or something like that because this screen does not run mainline klipper