# X-Axis Endstop

**URL:** <https://forum.sovol3d.com/t/x-axis-endstop/1640>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Tags:** homing\
**Created:** [February 13, 2023, 2:11am UTC](https://forum.sovol3d.com/t/x-axis-endstop/1640 "2023-02-13T02:11:13Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![george](https://avatars.discourse-cdn.com/v4/letter/g/71e660/32.png) [@george](https://forum.sovol3d.com/u/george)\
**Post date:** [February 21, 2023, 7:50am UTC](https://forum.sovol3d.com/t/x-axis-endstop/1640/4 "2023-02-21T07:50:16Z")

</div>

Try this:

> [@Extruder hitting gantry when homing](https://forum.sovol3d.com/t/extruder-hitting-gantry-when-homing/1098/5):
>
> TMC values were at 68/65 (default after reset) - causing the death rattle. Setting both to 70 removed that horrible noise/tech issue. Printing has been fine. I have G28 and G29 as part of starting lines in every G-code (Prusa Slicer). And I suspect the initial strong rattle had killed my bed probe - kudos to Sovol for a quick replacement.

---

_[View the full topic](https://forum.sovol3d.com/t/x-axis-endstop/1640)._
