# WIP: Sovol SV08 - Optimized G-Code / Macro.cfg / printer.cfg and highspeed settings PETG **URL:** \ **Category:** Sovol SV08\ **Tags:** firmware, klipper\ **Created:** [October 26, 2024, 1:32pm UTC](https://forum.sovol3d.com/t/wip-sovol-sv08-optimized-g-code-macro-cfg-printer-cfg-and-highspeed-settings-petg/5869 "2024-10-26T13:32:29Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![kampfwuffi](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/kampfwuffi/32/2214_2.png) [@kampfwuffi](https://forum.sovol3d.com/u/kampfwuffi)\ **Post date:** [October 26, 2024, 1:32pm UTC](https://forum.sovol3d.com/t/wip-sovol-sv08-optimized-g-code-macro-cfg-printer-cfg-and-highspeed-settings-petg/5869/1 "2024-10-26T13:32:29Z")
After 10 hours of printing PETG with my Sovol SV08 and 0.6mm nozzle i made optimizations to Klipper and to the Orca slicer. See this thread, this printer should be shipped with these fixes in firmware, to make printing easy. [Reddit r/Sovol Optimized Settings](https://www.reddit.com/r/Sovol/comments/1gchrm1/wip_sovol_sv08_optimized_gcode_macrocfg/) Please comment to make it even better. Sovol SV08 hardware is amazing, so should be it’s settings. ---
**Author:** ![Mike.Iirish](https://avatars.discourse-cdn.com/v4/letter/m/e495f1/32.png) [@Mike.Iirish](https://forum.sovol3d.com/u/Mike.Iirish)\ **Post date:** [October 30, 2024, 3:51pm UTC](https://forum.sovol3d.com/t/wip-sovol-sv08-optimized-g-code-macro-cfg-printer-cfg-and-highspeed-settings-petg/5869/2 "2024-10-30T15:51:43Z")
Yea I contact Solvo twice now enquiring as to is or will the SV08 shippey with updated printer firmware, to improve its usability. I soid that as it stands if I pre prehat the bed for asa / ppg or sothe printer wont start a print until the bed temperature drops to 65 digress? This is crazy, you havent hot a way to heatsoke the bed to allow the bed to stabilise to the temperature you needed to print the particular filiment you are going to print with,that is nonsense and a time waster. They disgraced my suggestions and said to heat the bed to 65c As thate what their policy is? Topal Bull. ---
**Author:** ![kampfwuffi](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/kampfwuffi/32/2214_2.png) [@kampfwuffi](https://forum.sovol3d.com/u/kampfwuffi)\ **Post date:** [February 1, 2025, 5:52pm UTC](https://forum.sovol3d.com/t/wip-sovol-sv08-optimized-g-code-macro-cfg-printer-cfg-and-highspeed-settings-petg/5869/3 "2025-02-01T17:52:40Z")
New version for optimized Macro.cfg and printer.cfg out for firmware 2.4.6 > **[Sovol SV08 - Optimized Macro.cfg & printer.cfg / Orca G-Code &...](https://www.printables.com/model/1056524-sovol-sv08-optimized-macrocfg-printercfg-orca-g-co)** > > Sovol SV08 is an incredible machine, but there is room for optimisation for Orca slicer preset and Klipper configuration | Download free 3D printable STL models ---
**Author:** ![SV08\_user](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@SV08\_user](https://forum.sovol3d.com/u/SV08_user)\ **Post date:** [July 16, 2025, 4:41pm UTC](https://forum.sovol3d.com/t/wip-sovol-sv08-optimized-g-code-macro-cfg-printer-cfg-and-highspeed-settings-petg/5869/4 "2025-07-16T16:41:07Z")
R3 graphite bed may do the no heatsoke needs