# What's needed for a Hero Me Toolhead?

**URL:** <https://forum.sovol3d.com/t/whats-needed-for-a-hero-me-toolhead/7979>\
**Category:** Sovol SV08\
**Tags:** challenging\
**Created:** [June 3, 2025, 9:14pm UTC](https://forum.sovol3d.com/t/whats-needed-for-a-hero-me-toolhead/7979 "2025-06-03T21:14:30Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Matif\_Koalas](https://avatars.discourse-cdn.com/v4/letter/m/da6949/32.png) [@Matif\_Koalas](https://forum.sovol3d.com/u/Matif_Koalas)\
**Post date:** [June 3, 2025, 9:14pm UTC](https://forum.sovol3d.com/t/whats-needed-for-a-hero-me-toolhead/7979/1 "2025-06-03T21:14:30Z")

</div>

I was looking at printing a Hero Me Gen7 toolhead, but then I noticed that there is not a SV08 carri8age. I haven’t set-up my SV08 (yet); does anybody know what the limitation is? Is it the PC board? Is it something else?

---

<div class="post-metadata">

**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\
**Post date:** [June 3, 2025, 10:34pm UTC](https://forum.sovol3d.com/t/whats-needed-for-a-hero-me-toolhead/7979/2 "2025-06-03T22:34:44Z")

</div>

> [@Matif\_Koalas](#):
>
> Hero Me Gen7 toolhead

Could be that when the nozzle is at 0,0 the stock printhead is less than 10mm from the belt guide. Wider toolheads won’t fit.

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/b/b31dd23a277958943eceb66113d70aef12444e05.jpeg)