# What's everyone getting when they run the input shaping using the accelerometer?

**URL:** <https://forum.sovol3d.com/t/whats-everyone-getting-when-they-run-the-input-shaping-using-the-accelerometer/4031>\
**Category:** Sovol Klipperized SV07\
**Created:** [December 8, 2023, 4:55am UTC](https://forum.sovol3d.com/t/whats-everyone-getting-when-they-run-the-input-shaping-using-the-accelerometer/4031 "2023-12-08T04:55:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![kn100](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/kn100/32/1562_2.png) [@kn100](https://forum.sovol3d.com/u/kn100)\
**Post date:** [December 8, 2023, 4:55am UTC](https://forum.sovol3d.com/t/whats-everyone-getting-when-they-run-the-input-shaping-using-the-accelerometer/4031/1 "2023-12-08T04:55:45Z")

</div>

I’m just curious, if you ran the input shaper on your SV07 using the supplied accelerometer, what values did it suggest? Curious to see how much variance there is.

Here is what it suggested for me:

# X axis

```auto
23:49
Recommended shaper_type_x = ei, shaper_freq_x = 40.2 Hz
23:49
To avoid too much smoothing with '3hump_ei', suggested max_accel <= 3000 mm/sec^2
23:49
Fitted shaper '3hump_ei' frequency = 64.2 Hz (vibrations = 5.2%, smoothing ~= 0.199)
23:49
To avoid too much smoothing with '2hump_ei', suggested max_accel <= 3000 mm/sec^2
23:49
Fitted shaper '2hump_ei' frequency = 52.0 Hz (vibrations = 5.3%, smoothing ~= 0.200)
23:49
To avoid too much smoothing with 'ei', suggested max_accel <= 3000 mm/sec^2
23:49
Fitted shaper 'ei' frequency = 40.2 Hz (vibrations = 5.4%, smoothing ~= 0.199)
23:48
To avoid too much smoothing with 'mzv', suggested max_accel <= 3000 mm/sec^2
23:48
Fitted shaper 'mzv' frequency = 32.0 Hz (vibrations = 8.4%, smoothing ~= 0.199)
23:48
To avoid too much smoothing with 'zv', suggested max_accel <= 6600 mm/sec^2
23:48
Fitted shaper 'zv' frequency = 41.2 Hz (vibrations = 17.1%, smoothing ~= 0.095)
23:48
Calculating the best input shaper parameters for x axis

```

# Y axis

```auto
00:04
Recommended shaper_type_y = mzv, shaper_freq_y = 39.2 Hz
00:04
To avoid too much smoothing with '3hump_ei', suggested max_accel <= 3000 mm/sec^2
00:04
Fitted shaper '3hump_ei' frequency = 64.2 Hz (vibrations = 0.5%, smoothing ~= 0.199)
00:04
To avoid too much smoothing with '2hump_ei', suggested max_accel <= 3000 mm/sec^2
00:04
Fitted shaper '2hump_ei' frequency = 52.0 Hz (vibrations = 0.5%, smoothing ~= 0.200)
00:04
To avoid too much smoothing with 'ei', suggested max_accel <= 3000 mm/sec^2
00:04
Fitted shaper 'ei' frequency = 40.2 Hz (vibrations = 0.6%, smoothing ~= 0.199)
00:04
To avoid too much smoothing with 'mzv', suggested max_accel <= 4500 mm/sec^2
00:04
Fitted shaper 'mzv' frequency = 39.2 Hz (vibrations = 0.9%, smoothing ~= 0.133)
00:04
To avoid too much smoothing with 'zv', suggested max_accel <= 6300 mm/sec^2
00:04
Fitted shaper 'zv' frequency = 40.2 Hz (vibrations = 6.1%, smoothing ~= 0.099)
00:04
Calculating the best input shaper parameters for y axis

```

---

<div class="post-metadata">

**Author:** ![Oregonsquatter](https://avatars.discourse-cdn.com/v4/letter/o/b5a626/32.png) [@Oregonsquatter](https://forum.sovol3d.com/u/Oregonsquatter)\
**Post date:** [March 11, 2024, 1:44pm UTC](https://forum.sovol3d.com/t/whats-everyone-getting-when-they-run-the-input-shaping-using-the-accelerometer/4031/2 "2024-03-11T13:44:06Z")

</div>

After doing its auto-calibrate procedure, mine showed 47.8 for X and 64.2 for Y. Don’t know if this matters that it’s a SV07+ with CV’s Klipper additions.
