# What firmware should I be using for the SV06 ACE PLUS and where should I be getting it? **URL:** \ **Category:** Sovol SV06 Plus ACE\ **Tags:** firmware\ **Created:** [March 27, 2025, 3:43pm UTC](https://forum.sovol3d.com/t/what-firmware-should-i-be-using-for-the-sv06-ace-plus-and-where-should-i-be-getting-it/7339 "2025-03-27T15:43:00Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![mechno](https://avatars.discourse-cdn.com/v4/letter/m/e99b99/32.png) [@mechno](https://forum.sovol3d.com/u/mechno)\ **Post date:** [March 27, 2025, 3:43pm UTC](https://forum.sovol3d.com/t/what-firmware-should-i-be-using-for-the-sv06-ace-plus-and-where-should-i-be-getting-it/7339/1 "2025-03-27T15:43:00Z")
I’m new to the Sovol family (loving it so far!) and this is my first Klipper printer. Looking at the firmware for the SV06 ACE Plus, but the downloads only have MAC and Windows Slicer Settings. Should I just be using the SV06 ACE firmware? There doesn’t seem to be an OTA option in the SV06 ACE PLUS. Thanks for reading! ---
**Author:** ![Oliver](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/oliver/32/2593_2.png) [@Oliver](https://forum.sovol3d.com/u/Oliver)\ **Post date:** [March 27, 2025, 6:59pm UTC](https://forum.sovol3d.com/t/what-firmware-should-i-be-using-for-the-sv06-ace-plus-and-where-should-i-be-getting-it/7339/2 "2025-03-27T18:59:22Z")
I understand the question to mean that there’s a problem with the firmware? I’m using the Sovol firmware, which I updated via the display menu. How I resolved the error message is described in the other topic. > [@Good printer](https://forum.sovol3d.com/t/good-printer/7014/4): > > Can everyone find the solutions to the problems in the SV06 ACE area or do we need an overview? Only the “Deprecated Klipper Option” needs a small adjustment. The value changes to 0.67 because the “max\_accel” is 15,000. The entry here must be “minimum\_cruise\_ratio: 0.67”. The Orca profiles have already been revised by Orca and should appear with version 2.3.0. The error messages for arc mode can be eliminated with an entry in the printer.cfg. [gcode\_arcs] resolution: 0.25 # An arc will be … ---
**Author:** ![mechno](https://avatars.discourse-cdn.com/v4/letter/m/e99b99/32.png) [@mechno](https://forum.sovol3d.com/u/mechno)\ **Post date:** [March 27, 2025, 7:40pm UTC](https://forum.sovol3d.com/t/what-firmware-should-i-be-using-for-the-sv06-ace-plus-and-where-should-i-be-getting-it/7339/3 "2025-03-27T19:40:25Z")
Thank you so much for your reply. I have no problems, but being that he SV06 ACE PLUS is new, i expect that there could be firmware updates that roll out shortly after launch. WHen I look at the Sovol site, the organization is confusing and I’m not sure what is the correct firmware to download. And I do not have an OTA firmware options on the machine (perhaps i need to update the firmware 😉 ) ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [March 27, 2025, 7:42pm UTC](https://forum.sovol3d.com/t/what-firmware-should-i-be-using-for-the-sv06-ace-plus-and-where-should-i-be-getting-it/7339/4 "2025-03-27T19:42:02Z")
[![](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/1/18067e1ba3c08055ef36bd9782b2ce508edca22f.jpeg "SOVOL SV06 PLUS ACE FIRMWARE UPDATE WITH OTA") ](https://www.youtube.com/watch?v=tuAgzEYtILw) ---
**Author:** ![Oliver](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/oliver/32/2593_2.png) [@Oliver](https://forum.sovol3d.com/u/Oliver)\ **Post date:** [March 27, 2025, 8:40pm UTC](https://forum.sovol3d.com/t/what-firmware-should-i-be-using-for-the-sv06-ace-plus-and-where-should-i-be-getting-it/7339/5 "2025-03-27T20:40:30Z")
The OTA is somewhat hidden in the menu, but it works flawlessly. There’s no need to download and install anything from the website. ---
**Author:** ![mechno](https://avatars.discourse-cdn.com/v4/letter/m/e99b99/32.png) [@mechno](https://forum.sovol3d.com/u/mechno)\ **Post date:** [March 27, 2025, 11:24pm UTC](https://forum.sovol3d.com/t/what-firmware-should-i-be-using-for-the-sv06-ace-plus-and-where-should-i-be-getting-it/7339/6 "2025-03-27T23:24:00Z")
I went and doublechecked and found OTA. I think it was some quirk that stopped it showing up the first time i’d looked for it. Thank you!