# What adjustments need to be made

**URL:** <https://forum.sovol3d.com/t/what-adjustments-need-to-be-made/8075>\
**Category:** Sovol SV06 Plus\
**Created:** [June 17, 2025, 10:33am UTC](https://forum.sovol3d.com/t/what-adjustments-need-to-be-made/8075 "2025-06-17T10:33:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Chad](https://avatars.discourse-cdn.com/v4/letter/c/ecccb3/32.png) [@Chad](https://forum.sovol3d.com/u/Chad)\
**Post date:** [June 17, 2025, 10:33am UTC](https://forum.sovol3d.com/t/what-adjustments-need-to-be-made/8075/1 "2025-06-17T10:33:37Z")

</div>

What causes the corners to look like this? It’s like there is too much extrusion but only on corners as they are not perfectly square, they kind of bow out from the side walls. Not a big deal for visual prints where I post process but on raw prints where accuracy is of importance I would like to correct this. Very clean prints otherwise.

 ![IMG_7118](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/e/ee00d6d735b6cc149c5c31f89b4d5af82639123f.jpeg)

---

<div class="post-metadata">

**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\
**Post date:** [June 18, 2025, 1:59am UTC](https://forum.sovol3d.com/t/what-adjustments-need-to-be-made/8075/2 "2025-06-18T01:59:40Z")

</div>

See pressure advance at

> **[Introduction](https://ellis3dp.com/Print-Tuning-Guide/articles/pressure_linear_advance/introduction.html)**
>
> Ellis’ Print Tuning Guide