# Warped Bed Question

**URL:** <https://forum.sovol3d.com/t/warped-bed-question/6637>\
**Category:** Sovol SV06 ACE\
**Tags:** bed-leveling, leveling, advice\
**Created:** [January 21, 2025, 3:20pm UTC](https://forum.sovol3d.com/t/warped-bed-question/6637 "2025-01-21T15:20:53Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![TMiller](https://avatars.discourse-cdn.com/v4/letter/t/cab0a1/32.png) [@TMiller](https://forum.sovol3d.com/u/TMiller)\
**Post date:** [April 8, 2026, 4:12am UTC](https://forum.sovol3d.com/t/warped-bed-question/6637/21 "2026-04-08T04:12:56Z")

</div>

its been over a year it looks like, still holding up decently? have you done any high bed temp prints (my bed temp for petg is around 70-75c) to see if that affects it? also what about some kind of thread locker to help hold the screws? or maybe thats too much overkill?

---

<div class="post-metadata">

**Author:** ![TMiller](https://avatars.discourse-cdn.com/v4/letter/t/cab0a1/32.png) [@TMiller](https://forum.sovol3d.com/u/TMiller)\
**Post date:** [April 25, 2026, 5:58am UTC](https://forum.sovol3d.com/t/warped-bed-question/6637/22 "2026-04-25T05:58:30Z")

</div>

can confirm, this method works WELL. as you can see in the photos, im at .087mm and started at .654

 ![Screenshot 2026-04-11 120645](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/7/789577d61ad14fdbd48d9e6153e2f1a0101ec606.jpeg)

 ![Screenshot 2026-04-25 005212](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/8/8d40458d721993d3dde40d923f1a28c8eeb03d6d.png)

[Previous page](https://forum.sovol3d.com/t/warped-bed-question/6637.md?page=1)