# Updating SV03 to touch screen problems

**URL:** <https://forum.sovol3d.com/t/updating-sv03-to-touch-screen-problems/1068>\
**Category:** Sovol SV03 BIG DD 3D printer\
**Created:** [December 19, 2022, 10:19pm UTC](https://forum.sovol3d.com/t/updating-sv03-to-touch-screen-problems/1068 "2022-12-19T22:19:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jean](https://avatars.discourse-cdn.com/v4/letter/j/fbc32d/32.png) [@Jean](https://forum.sovol3d.com/u/Jean)\
**Post date:** [December 19, 2022, 10:19pm UTC](https://forum.sovol3d.com/t/updating-sv03-to-touch-screen-problems/1068/1 "2022-12-19T22:19:04Z")

</div>

I downloaded “SV03 Touch Screen Firmware (16 points leveling,18th Nov).rar” Bought new 16gb Micro sd card. format with cmd, ran “format /q f: /fs:fat32 /a:4096” formatted fine. Copy DWIN\_SET folder to the SD card. insert it in the SD card reader of the display. Turn on SV03 wait till it updates. It gets to the ICL and after about 2 minutes this pops up

![20221215_205504_Film1_resized](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/1X/3fad911a571362a70359ba5f1b262de01c541919.jpeg)

I have updated the SV03 then try updating the touch screen and downgraded and tried. I did everything I know. The only thing I can think of is my Touch Screen is 4.5 and remembering someone saying something about that version? Anyhelp?

---

<div class="post-metadata">

**Author:** ![Jean](https://avatars.discourse-cdn.com/v4/letter/j/fbc32d/32.png) [@Jean](https://forum.sovol3d.com/u/Jean)\
**Post date:** [December 20, 2022, 1:30am UTC](https://forum.sovol3d.com/t/updating-sv03-to-touch-screen-problems/1068/2 "2022-12-20T01:30:17Z")

</div>

Just a picture before it turns to snow.  
 ![20221215_205441_Film1_resized](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/1X/010a21c2c71361ba01addc2a6c8144bbada11a85.jpeg)