# Unable to upload gcode file via web interface - error cannot upload file

**URL:** <https://forum.sovol3d.com/t/unable-to-upload-gcode-file-via-web-interface-error-cannot-upload-file/6518>\
**Category:** Sovol SV08\
**Tags:** advice\
**Created:** [January 10, 2025, 2:00am UTC](https://forum.sovol3d.com/t/unable-to-upload-gcode-file-via-web-interface-error-cannot-upload-file/6518 "2025-01-10T02:00:33Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![belkaze](https://avatars.discourse-cdn.com/v4/letter/b/d26b3c/32.png) [@belkaze](https://forum.sovol3d.com/u/belkaze)\
**Post date:** [January 10, 2025, 2:00am UTC](https://forum.sovol3d.com/t/unable-to-upload-gcode-file-via-web-interface-error-cannot-upload-file/6518/1 "2025-01-10T02:00:33Z")

</div>

Had no issues uploading gcode files via web interface until recently uploads to 100% then hangs then complains cannot upload file

wifi/network fine nil changes

any advice?

---

<div class="post-metadata">

**Author:** ![wrusman](https://avatars.discourse-cdn.com/v4/letter/w/8dc957/32.png) [@wrusman](https://forum.sovol3d.com/u/wrusman)\
**Post date:** [January 10, 2025, 8:29am UTC](https://forum.sovol3d.com/t/unable-to-upload-gcode-file-via-web-interface-error-cannot-upload-file/6518/2 "2025-01-10T08:29:25Z")

</div>

Have you checked that the storage on the printer isn’t full ? AFAIK All gcode files are saved indefinitely on the printer

---

<div class="post-metadata">

**Author:** ![belkaze](https://avatars.discourse-cdn.com/v4/letter/b/d26b3c/32.png) [@belkaze](https://forum.sovol3d.com/u/belkaze)\
**Post date:** [January 10, 2025, 8:36pm UTC](https://forum.sovol3d.com/t/unable-to-upload-gcode-file-via-web-interface-error-cannot-upload-file/6518/3 "2025-01-10T20:36:35Z")

</div>

2.9 GB Free space, so no problem there.

---

<div class="post-metadata">

**Author:** ![belkaze](https://avatars.discourse-cdn.com/v4/letter/b/d26b3c/32.png) [@belkaze](https://forum.sovol3d.com/u/belkaze)\
**Post date:** [January 10, 2025, 11:35pm UTC](https://forum.sovol3d.com/t/unable-to-upload-gcode-file-via-web-interface-error-cannot-upload-file/6518/4 "2025-01-10T23:35:15Z")

</div>

it’s ok sorted - not sure why but resetting browser settings fixed it