# Unable to print with Polymaker PolyTerra Marble White PLA

**URL:** <https://forum.sovol3d.com/t/unable-to-print-with-polymaker-polyterra-marble-white-pla/8011>\
**Category:** Sovol SV06 ACE\
**Tags:** advice, filament\
**Created:** [June 8, 2025, 12:20pm UTC](https://forum.sovol3d.com/t/unable-to-print-with-polymaker-polyterra-marble-white-pla/8011 "2025-06-08T12:20:55Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![KalciumKing](https://avatars.discourse-cdn.com/v4/letter/k/76d3ee/32.png) [@KalciumKing](https://forum.sovol3d.com/u/KalciumKing)\
**Post date:** [June 13, 2025, 6:27pm UTC](https://forum.sovol3d.com/t/unable-to-print-with-polymaker-polyterra-marble-white-pla/8011/4 "2025-06-13T18:27:48Z")

</div>

I tried a regular PLA, same problem on the 0.8 nozzle. Turns out this was the issue, my filament dryer to extruder mod:  
([Pull filament direct from a dryer - reverse bowden - #3 by KalciumKing](https://forum.sovol3d.com/t/pull-filament-direct-from-a-dryer-reverse-bowden/7916/3))

I got rid of the mod, and was able to print a benchy with a 0.8 mm nozzle in regular PLA and the marble white PLA.  
I have gone back to a 0.6 mm nozzle, fingers crossed it doesn’t clog and I can get nice prints out of it.

---

_[View the full topic](https://forum.sovol3d.com/t/unable-to-print-with-polymaker-polyterra-marble-white-pla/8011)._