# Unable to get printer info from moonraker

**URL:** <https://forum.sovol3d.com/t/unable-to-get-printer-info-from-moonraker/3662>\
**Category:** Sovol Klipperized SV07\
**Created:** [October 13, 2023, 5:44pm UTC](https://forum.sovol3d.com/t/unable-to-get-printer-info-from-moonraker/3662 "2023-10-13T17:44:35Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![marcokitt2000](https://avatars.discourse-cdn.com/v4/letter/m/e56c9b/32.png) [@marcokitt2000](https://forum.sovol3d.com/u/marcokitt2000)\
**Post date:** [October 13, 2023, 5:44pm UTC](https://forum.sovol3d.com/t/unable-to-get-printer-info-from-moonraker/3662/1 "2023-10-13T17:44:35Z")

</div>

Klipper Unable to get printer info from moonraker everytime start up the printer than goes away everything is normal. i have 1.0.17 with additions from Christiian Vick without it same issue other wlan net work or no wifi same. Does sovol users here how to fix this?

Gr. Marco

---

<div class="post-metadata">

**Author:** ![Panda2aa](https://avatars.discourse-cdn.com/v4/letter/p/7cd45c/32.png) [@Panda2aa](https://forum.sovol3d.com/u/Panda2aa)\
**Post date:** [October 13, 2023, 6:45pm UTC](https://forum.sovol3d.com/t/unable-to-get-printer-info-from-moonraker/3662/2 "2023-10-13T18:45:32Z")

</div>

i had the same issue it turned out it was a faulty sv07 printer there are some sv07 that is a bad batch sovol replaced mine very fast now it working very well with no issues, also check your wifi as 2.4mhz will not work if it hight mine as 3 setting

---

<div class="post-metadata">

**Author:** ![marcokitt2000](https://avatars.discourse-cdn.com/v4/letter/m/e56c9b/32.png) [@marcokitt2000](https://forum.sovol3d.com/u/marcokitt2000)\
**Post date:** [October 13, 2023, 7:58pm UTC](https://forum.sovol3d.com/t/unable-to-get-printer-info-from-moonraker/3662/3 "2023-10-13T19:58:57Z")

</div>

My printer works fine, and wifi to. When i turn on the printer power on than i get 1 time the issue.  
I think its software or some settings.  
Sovol do you know about it?

---

<div class="post-metadata">

**Author:** ![DrR00T90](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/drr00t90/32/1336_2.png) [@DrR00T90](https://forum.sovol3d.com/u/DrR00T90)\
**Post date:** [October 14, 2023, 6:22pm UTC](https://forum.sovol3d.com/t/unable-to-get-printer-info-from-moonraker/3662/4 "2023-10-14T18:22:27Z")

</div>

Hi there,

correct time and zone set?

Greetings

---

<div class="post-metadata">

**Author:** ![marcokitt2000](https://avatars.discourse-cdn.com/v4/letter/m/e56c9b/32.png) [@marcokitt2000](https://forum.sovol3d.com/u/marcokitt2000)\
**Post date:** [October 15, 2023, 10:08am UTC](https://forum.sovol3d.com/t/unable-to-get-printer-info-from-moonraker/3662/5 "2023-10-15T10:08:33Z")

</div>

Mmmm i have set it to europa amsterdam.

---

<div class="post-metadata">

**Author:** ![Panda2aa](https://avatars.discourse-cdn.com/v4/letter/p/7cd45c/32.png) [@Panda2aa](https://forum.sovol3d.com/u/Panda2aa)\
**Post date:** [October 23, 2023, 1:05pm UTC](https://forum.sovol3d.com/t/unable-to-get-printer-info-from-moonraker/3662/6 "2023-10-23T13:05:51Z")

</div>

i have a new sv07 printer and work ok must have been duff printer
