# TPU print settings

**URL:** <https://forum.sovol3d.com/t/tpu-print-settings/8967>\
**Category:** Sovol SV07 Plus\
**Created:** [November 2, 2025, 12:32pm UTC](https://forum.sovol3d.com/t/tpu-print-settings/8967 "2025-11-02T12:32:19Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![tingo](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/tingo/32/1731_2.png) [@tingo](https://forum.sovol3d.com/u/tingo)\
**Post date:** [November 2, 2025, 12:32pm UTC](https://forum.sovol3d.com/t/tpu-print-settings/8967/1 "2025-11-02T12:32:19Z")

</div>

Here are my working print settings for TPU (well, I have only printed TPU 95A so far). PrusaSlicer is what I use, I copied the “Generic FLEX” profile for one of the Prusa printers and made changes. Changes are based on what I found here in Sovol’s forums (not necessarily for the SV07 printer).  
filament settings:

[Generic FLEX@SV07.ini](https://forum.sovol3d.com/uploads/short-url/Dh70qExZ0txR8nmBDBRx2WRXhi.ini) (2.8 KB)

speed settings

[0.20mm QUALITY @SV07 - FLEX.ini](https://forum.sovol3d.com/uploads/short-url/8zwIJQZ8UBJK6oOxNb60v9vpKaH.ini) (5.5 KB)  
None of these are optimized, they are just what I’m working with now.

---

<div class="post-metadata">

**Author:** ![tingo](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/tingo/32/1731_2.png) [@tingo](https://forum.sovol3d.com/u/tingo)\
**Post date:** [November 2, 2025, 2:43pm UTC](https://forum.sovol3d.com/t/tpu-print-settings/8967/2 "2025-11-02T14:43:22Z")

</div>

One thing I have noticed, the filament profile comes with  
`start_filament_gcode = “M900 K0 ; Filament gcode”`  
but the SV07 doesn’t understand this code.

---

<div class="post-metadata">

**Author:** ![cekamaphil](https://avatars.discourse-cdn.com/v4/letter/c/db5fbb/32.png) [@cekamaphil](https://forum.sovol3d.com/u/cekamaphil)\
**Post date:** [January 25, 2026, 2:11am UTC](https://forum.sovol3d.com/t/tpu-print-settings/8967/3 "2026-01-25T02:11:07Z")

</div>

Bonjour,

Merci pour ces réglages de l’imprimante avec le filament TPU. Je viens d’acquérir une SV07 PLUS ; cela fait près de 8 années que je n’avais pas touché une imprimante 3D, 8 années que je ne souhaite à personne de vivre, et je ne me rappelle plus grand-chose des techniques et de l’utilisation de ces engins (c’était une prusa i3, et il y eu pas mal de progrès sur les machines et leurs interfaces).

Je me essayer le TPU pour la première fois et je vais essayer tes réglages.

Depuis)e mois de novembre as tu affiné les réglages que tu as partagé ou bien il conviennent parfaitement pour tes besoins en terme de résultats ?

Merci pour ton partage.

A bientôt

---

<div class="post-metadata">

**Author:** ![tingo](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/tingo/32/1731_2.png) [@tingo](https://forum.sovol3d.com/u/tingo)\
**Post date:** [January 25, 2026, 3:58pm UTC](https://forum.sovol3d.com/t/tpu-print-settings/8967/4 "2026-01-25T15:58:10Z")

</div>

(warning: unfortunately I don’t read French, so I’m basing my answer on google translate translation)  
I haven’t changed the settings.  
But - I haven’t printed much more TPU either.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [January 25, 2026, 4:03pm UTC](https://forum.sovol3d.com/t/tpu-print-settings/8967/5 "2026-01-25T16:03:55Z")

</div>

La traduction du post de @tingo est qu’il n’a pas changé ses paramètres pour imprimer du TPU mais qu’il n’en a plus imprimé depuis.

Si ça peut aider

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [January 25, 2026, 4:04pm UTC](https://forum.sovol3d.com/t/tpu-print-settings/8967/6 "2026-01-25T16:04:57Z")

</div>

Hi,

I’ve translated your post in french, thx