# Thermal runaway e1 printer halted

**URL:** <https://forum.sovol3d.com/t/thermal-runaway-e1-printer-halted/6057>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [November 21, 2024, 7:24am UTC](https://forum.sovol3d.com/t/thermal-runaway-e1-printer-halted/6057 "2024-11-21T07:24:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Emilio](https://avatars.discourse-cdn.com/v4/letter/e/f475e1/32.png) [@Emilio](https://forum.sovol3d.com/u/Emilio)\
**Post date:** [November 21, 2024, 7:24am UTC](https://forum.sovol3d.com/t/thermal-runaway-e1-printer-halted/6057/1 "2024-11-21T07:24:43Z")

</div>

Keep getting this error after about ten minutes of prilnting.

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [November 21, 2024, 12:03pm UTC](https://forum.sovol3d.com/t/thermal-runaway-e1-printer-halted/6057/2 "2024-11-21T12:03:12Z")

</div>

Than the thermistor needs to be replaced.

These will fit, but currently out of stock in the US.  
[Official Creality Original Ender 3 S1 Thermistor Sensor 5 Pack](https://www.amazon.com/Creality-Thermistor-3D-Replacement-Compatible/dp/B09QPH3HMR?keywords=ender%2Bs1%2Bthermistor&qid=1681121408&sr=8-3&th=1&linkCode=ll1&tag=blakadders-20&linkId=ecafac23db4e14c067790dc725cb2a04&language=en_US&ref_=as_li_ss_tl)

> **[Hot End Parts for SV06 - SV06 Knowledge Base](https://sv06.blakadder.com/Parts/hotend-parts/#bi-metal-heatbreak)**
>
> List of parts used in Sovol SV06 hot end.

Your other choice is just to buy a new hotend.

> **[Sovol SV06 All Metal Hotend Kit](https://www.sovol3d.com/products/sv06-all-metal-hotend?_pos=1&_sid=167c8813d&_ss=r)**
>
> This SV06 All Metal Hotend Kit comes with the heat block, brass nozzle, thermistor, heating tube, all-metal heat break, and silicone cover.