# T300 network **URL:** \ **Category:** Comgrow T300\ **Created:** [June 7, 2025, 9:34am UTC](https://forum.sovol3d.com/t/t300-network/8007 "2025-06-07T09:34:55Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Greg1](https://avatars.discourse-cdn.com/v4/letter/g/91b2a8/32.png) [@Greg1](https://forum.sovol3d.com/u/Greg1)\ **Post date:** [June 7, 2025, 9:34am UTC](https://forum.sovol3d.com/t/t300-network/8007/1 "2025-06-07T09:34:55Z")
Hello, I’m new to the T300 printer. In the bottom left corner, we have an RJ45 connector for the wired network. In the configuration, we only have the wireless activation and settings. How do I configure the T300 printer to enable and configure the wired network? Thank you. ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [June 7, 2025, 2:21pm UTC](https://forum.sovol3d.com/t/t300-network/8007/2 "2025-06-07T14:21:13Z")
Hello, Have you tried simply connecting an Ethernet cable? ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [June 7, 2025, 3:58pm UTC](https://forum.sovol3d.com/t/t300-network/8007/3 "2025-06-07T15:58:28Z")
You just have to enter the IP in Orca. ![Capture](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/d/d292632007a9b60de9e515d75198c583b4196378.jpeg) ---
**Author:** ![Greg1](https://avatars.discourse-cdn.com/v4/letter/g/91b2a8/32.png) [@Greg1](https://forum.sovol3d.com/u/Greg1)\ **Post date:** [June 7, 2025, 4:54pm UTC](https://forum.sovol3d.com/t/t300-network/8007/4 "2025-06-07T16:54:06Z")
Yes i have connected to ethernet cable, but nothing. And i have scan my network in a computer (ip scanner software) i don’t see anything. ---
**Author:** ![Greg1](https://avatars.discourse-cdn.com/v4/letter/g/91b2a8/32.png) [@Greg1](https://forum.sovol3d.com/u/Greg1)\ **Post date:** [June 7, 2025, 4:55pm UTC](https://forum.sovol3d.com/t/t300-network/8007/5 "2025-06-07T16:55:25Z")
Yes, after you are connected to network ---
**Author:** ![cardoc](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/cardoc/32/6926_2.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [June 7, 2025, 9:08pm UTC](https://forum.sovol3d.com/t/t300-network/8007/6 "2025-06-07T21:08:56Z")
Depending on how your network is setup an IP scanner on your PC might not “see” the printer. Best method is to log in to your router’s web interface and find the “connected clients” list. The printer has no default IP and will use the one your router gives it. ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [June 7, 2025, 10:28pm UTC](https://forum.sovol3d.com/t/t300-network/8007/7 "2025-06-07T22:28:16Z")
> [@Greg1](#): > > Yes i have connected to ethernet cable, but nothing. > And i have scan my network in a computer (ip scanner software) i don’t see anything. If you have a cable attached, the IP should show on the printer screen. Advanced/Show IP.. Then you enter that into Orca. ---
**Author:** ![Greg1](https://avatars.discourse-cdn.com/v4/letter/g/91b2a8/32.png) [@Greg1](https://forum.sovol3d.com/u/Greg1)\ **Post date:** [June 8, 2025, 8:43am UTC](https://forum.sovol3d.com/t/t300-network/8007/8 "2025-06-08T08:43:18Z")
Ho, i see the problem: 3d printer is only DHCP. I fix the problem, then IP is showed on printer. Then i have to reserve IP in my router for the printer for connect all time to same IP else IP can change. Thanks to all