# Swiched on printer, blue screen **URL:** \ **Category:** Sovol SV06 Fully Open Source 3D Printer\ **Created:** [June 13, 2023, 2:13pm UTC](https://forum.sovol3d.com/t/swiched-on-printer-blue-screen/2833 "2023-06-13T14:13:16Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![tonygagey](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/tonygagey/32/3080_2.png) [@tonygagey](https://forum.sovol3d.com/u/tonygagey)\ **Post date:** [June 13, 2023, 2:13pm UTC](https://forum.sovol3d.com/t/swiched-on-printer-blue-screen/2833/1 "2023-06-13T14:13:16Z")
So i haven used the printer for about a week and today switched it on to do some printing and just got a blue screen. Any ideas? It has been very hot in my workshop, 30°+ but surely that couldn’t be the problem? ---
**Author:** ![meicalnissyen](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@meicalnissyen](https://forum.sovol3d.com/u/meicalnissyen)\ **Post date:** [June 13, 2023, 6:20pm UTC](https://forum.sovol3d.com/t/swiched-on-printer-blue-screen/2833/2 "2023-06-13T18:20:54Z")
power cycle with nothing in the card slot cable up and see if you can talk to it take a pic with a dated newspaper as exibhit A for your warranty claim ---
**Author:** ![Rossco](https://avatars.discourse-cdn.com/v4/letter/r/5f9b8f/32.png) [@Rossco](https://forum.sovol3d.com/u/Rossco)\ **Post date:** [June 14, 2023, 8:29am UTC](https://forum.sovol3d.com/t/swiched-on-printer-blue-screen/2833/3 "2023-06-14T08:29:23Z")
the ambient temp should not be a problem, as I have printed on days up to 35c with petg with my sv06, but follow the advice from meicalnissyen ---
**Author:** ![tonygagey](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/tonygagey/32/3080_2.png) [@tonygagey](https://forum.sovol3d.com/u/tonygagey)\ **Post date:** [June 14, 2023, 10:27am UTC](https://forum.sovol3d.com/t/swiched-on-printer-blue-screen/2833/4 "2023-06-14T10:27:56Z")
I tried a firmware upgrade and that appears to have worked!