# SV08 ZOffset Problem

**URL:** <https://forum.sovol3d.com/t/sv08-zoffset-problem/5605>\
**Category:** Sovol SV08\
**Created:** [September 1, 2024, 6:40pm UTC](https://forum.sovol3d.com/t/sv08-zoffset-problem/5605 "2024-09-01T18:40:49Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![SV08\_user](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@SV08\_user](https://forum.sovol3d.com/u/SV08_user)\
**Post date:** [September 1, 2024, 6:40pm UTC](https://forum.sovol3d.com/t/sv08-zoffset-problem/5605/1 "2024-09-01T18:40:49Z")

</div>

My SV08 started doing the same, DAMAGED my build plate:

Calibrate ZOffset routine works, looks like no issues.

I tried an OLD print and this worked; OK

So NOW I think there is something in Orca Slicer causing the issue, (z off set is 0 in Ocra slicer, so it’s not this)

Maybe the Inductive Probe: