# Sv08 trips power when bed temp hits 97-98 degrees C

**URL:** <https://forum.sovol3d.com/t/sv08-trips-power-when-bed-temp-hits-97-98-degrees-c/8006>\
**Category:** Sovol SV08\
**Tags:** heat-fails\
**Created:** [June 7, 2025, 5:38am UTC](https://forum.sovol3d.com/t/sv08-trips-power-when-bed-temp-hits-97-98-degrees-c/8006 "2025-06-07T05:38:30Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [June 8, 2025, 3:07am UTC](https://forum.sovol3d.com/t/sv08-trips-power-when-bed-temp-hits-97-98-degrees-c/8006/8 "2025-06-08T03:07:45Z")

</div>

It was @jbob about the GFI’s

> [@Tripping GFCI](https://forum.sovol3d.com/t/tripping-gfci/7663):
>
> Just unboxed and put together the SV06 Plus Ace. During its calibration phase, it’s tripped two separate gfci circuits. The first circuit had a light load on it, but nothing drastic. The second circuit I tried was isolated with nothing else on it and still tripped. Anyone have any issues with this printer or any for that matter tripping gfci circuits? Going to run it on a non gfci next, but thought I’d reach out.

---

_[View the full topic](https://forum.sovol3d.com/t/sv08-trips-power-when-bed-temp-hits-97-98-degrees-c/8006)._