# SV08 Stops Extruding Mid-Print

**URL:** <https://forum.sovol3d.com/t/sv08-stops-extruding-mid-print/6482>\
**Category:** Sovol SV08\
**Created:** [January 5, 2025, 1:55pm UTC](https://forum.sovol3d.com/t/sv08-stops-extruding-mid-print/6482 "2025-01-05T13:55:58Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![jakegub](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/jakegub/32/4577_2.png) [@jakegub](https://forum.sovol3d.com/u/jakegub)\
**Post date:** [September 17, 2025, 12:58pm UTC](https://forum.sovol3d.com/t/sv08-stops-extruding-mid-print/6482/21 "2025-09-17T12:58:12Z")

</div>

In case anyone else reads this and the above comments don’t help, I was having this problem and like the folks said, this sounds like heat creep. My heat creep was coming because the nozzle throat/neck (long skinny part from the top) was not transferring heat into the heatsink. I added thermal paste to the outisde of the neck and inserted it back into the heatsink and it fixed all of my mid-print problems. But I do think that filament resistance plays a role too.

---

<div class="post-metadata">

**Author:** ![M.25](https://avatars.discourse-cdn.com/v4/letter/m/5f8ce5/32.png) [@M.25](https://forum.sovol3d.com/u/M.25)\
**Post date:** [September 2, 2026, 11:13pm UTC](https://forum.sovol3d.com/t/sv08-stops-extruding-mid-print/6482/22 "2026-09-02T23:13:57Z")

</div>

Hi, I’m experiencing the same problem after the update. What did you do to fix it for good?

[Previous page](https://forum.sovol3d.com/t/sv08-stops-extruding-mid-print/6482.md?page=1)