# SV08 Official Eddy Upgrade

**URL:** <https://forum.sovol3d.com/t/sv08-official-eddy-upgrade/10116>\
**Category:** Eddy Sensor\
**Created:** [June 12, 2026, 6:07pm UTC](https://forum.sovol3d.com/t/sv08-official-eddy-upgrade/10116 "2026-06-12T18:07:37Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\
**Post date:** [June 12, 2026, 6:41pm UTC](https://forum.sovol3d.com/t/sv08-official-eddy-upgrade/10116/2 "2026-06-12T18:41:02Z")

</div>

> [@Faenum](#):
>
> first layer z is way too low, to the point where its so squished into the bed

I don’t have the configuration files for an SV08E but both the Zero and the Max have offsets hard coded in the Z\_offset macro. It overwrites any offset you’ve set. See:

> [@Issues with maintaining Z Offset](https://forum.sovol3d.com/t/issues-with-maintaining-z-offset/10084/11):
>
> Sometimes on my SV08 I run the [Z Offset](https://forum.sovol3d.com/t/issues-with-maintaining-z-offset/10084) twice

---

_[View the full topic](https://forum.sovol3d.com/t/sv08-official-eddy-upgrade/10116)._