# SV08 Max Layer Shifts, AB Belt Tension & Possible Bad Stepper?

**URL:** <https://forum.sovol3d.com/t/sv08-max-layer-shifts-ab-belt-tension-possible-bad-stepper/8827>\
**Category:** Sovol SV08 MAX\
**Created:** [October 3, 2025, 3:34pm UTC](https://forum.sovol3d.com/t/sv08-max-layer-shifts-ab-belt-tension-possible-bad-stepper/8827 "2025-10-03T15:34:38Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![joymonkey](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/joymonkey/32/4682_2.png) [@joymonkey](https://forum.sovol3d.com/u/joymonkey)\
**Post date:** [October 3, 2025, 8:31pm UTC](https://forum.sovol3d.com/t/sv08-max-layer-shifts-ab-belt-tension-possible-bad-stepper/8827/5 "2025-10-03T20:31:10Z")

</div>

Thank you. I’ve read (in the SV08 Max Facebook group and [on this forum](https://forum.sovol3d.com/t/sv08-max-layer-shift-on-test-benchy/8741/5)) that for the SV08 it’s 110 Hz for AB belts, but for the SV08 Max to shoot for 140 Hz. Are you sure 110hz is correct for the SV08 Max AB belt tension?

---

_[View the full topic](https://forum.sovol3d.com/t/sv08-max-layer-shifts-ab-belt-tension-possible-bad-stepper/8827)._