# SV08; error code 7

**URL:** <https://forum.sovol3d.com/t/sv08-error-code-7/7275>\
**Category:** Sovol SV08\
**Created:** [March 22, 2025, 6:16am UTC](https://forum.sovol3d.com/t/sv08-error-code-7/7275 "2025-03-22T06:16:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Piotr](https://avatars.discourse-cdn.com/v4/letter/p/839c29/32.png) [@Piotr](https://forum.sovol3d.com/u/Piotr)\
**Post date:** [March 22, 2025, 6:16am UTC](https://forum.sovol3d.com/t/sv08-error-code-7/7275/1 "2025-03-22T06:16:28Z")

</div>

Hi,

Any idea what error code 7 means?

I got it twice, during the Z offset calibration process, right after a test print was finished and a reboot. Finally the third calibration was successful, but I wonder what’s going on.

This is a new printer I got yesterday. Firmware version 2.4.6 as of 2024-12-23

Best Regards

Peter

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [March 22, 2025, 3:29pm UTC](https://forum.sovol3d.com/t/sv08-error-code-7/7275/2 "2025-03-22T15:29:43Z")

</div>

Hi,  
@sovol3d  
Maybe for you.

---

<div class="post-metadata">

**Author:** ![sovol3d](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/sovol3d/32/9_2.png) [@sovol3d](https://forum.sovol3d.com/u/sovol3d)\
**Post date:** [March 25, 2025, 6:33am UTC](https://forum.sovol3d.com/t/sv08-error-code-7/7275/3 "2025-03-25T06:33:31Z")

</div>

Hello. Could you send an e-mail to info@sovol3d? Please enclose the pictures and order number. The technician will help you to solve the problem
