# SV08 Eddy Current Scanning Kit Installation Guide Video

**URL:** <https://forum.sovol3d.com/t/sv08-eddy-current-scanning-kit-installation-guide-video/9079>\
**Category:** Eddy Sensor\
**Created:** [November 26, 2025, 3:41am UTC](https://forum.sovol3d.com/t/sv08-eddy-current-scanning-kit-installation-guide-video/9079 "2025-11-26T03:41:48Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [November 26, 2025, 3:41am UTC](https://forum.sovol3d.com/t/sv08-eddy-current-scanning-kit-installation-guide-video/9079/1 "2025-11-26T03:41:48Z")

</div>

[![](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/2/24afe2eca6f1fdcba6533822356697d2ca1e4bbc.jpeg "SV08 Eddy Current Scanning Kit Installation Guide Video") ](https://www.youtube.com/watch?v=8-RlidK7coI)

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [November 26, 2025, 3:43am UTC](https://forum.sovol3d.com/t/sv08-eddy-current-scanning-kit-installation-guide-video/9079/2 "2025-11-26T03:43:07Z")

</div>



---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [November 26, 2025, 9:00am UTC](https://forum.sovol3d.com/t/sv08-eddy-current-scanning-kit-installation-guide-video/9079/3 "2025-11-26T09:00:11Z")

</div>

Hello,

I have rarely seen such a detailed tutorial.

👏👏

---

<div class="post-metadata">

**Author:** ![Liberty4Ever](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/liberty4ever/32/3265_2.png) [@Liberty4Ever](https://forum.sovol3d.com/u/Liberty4Ever)\
**Post date:** [November 28, 2025, 10:03pm UTC](https://forum.sovol3d.com/t/sv08-eddy-current-scanning-kit-installation-guide-video/9079/4 "2025-11-28T22:03:46Z")

</div>

My SV08 Eddy upgrade kit arrived yesterday. Yes, on Thanksgiving. I need to install the R3men graphite bed, the replacement Microswiss hot end after the last big blob-of-death crash caused by the inaccurate bed mesh from the original inductive probe, and then install the Eddy probe upgrade.

I was impressed with the look of the Eddy upgrade kit, including a 42 page installation manual. The video was a nice addition which I saved to my SV08 folder. Much of the video covers flashing new firmware, and all of that was shown in Windows. I would have liked to have seen it for Linux, but I’ll figure it out.

The Eddy upgrade will need to wait. The SV08 has been down for so long that I piled a bunch of spools of filament in front of it and some other stuff on top of that. 🙂 I also put my old Neptune 4 Pro printer on top of the enclosure that I 3D printed for the SV08 and it’s currently 6 hours into a 22 hour print job.

I’m surprised that Sovol hasn’t done a mid-life upgrade to the SV08 to include the Eddy probe to get it up the the Zero and SV08 Max standard. It would result in much more customer satisfaction.