# SV07 Print Error - print setting **URL:** \ **Category:** Sovol Klipperized SV07\ **Created:** [September 20, 2024, 5:02pm UTC](https://forum.sovol3d.com/t/sv07-print-error-print-setting/5704 "2024-09-20T17:02:26Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![zaberwolfi](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/zaberwolfi/32/2019_2.png) [@zaberwolfi](https://forum.sovol3d.com/u/zaberwolfi)\ **Post date:** [September 20, 2024, 5:02pm UTC](https://forum.sovol3d.com/t/sv07-print-error-print-setting/5704/1 "2024-09-20T17:02:26Z")
Hello I have a problem with 3D printing. I’ve tried everything, new leveling, temperature but I always get the same error. See photo. I use Sovol Cura, filament from eSUN PLA+HS. Can someone help me. ![Print](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/5/5fe99c4636507f2b64672dd6fdb7c3649b80cfa8.jpeg) Danke Wolfgang ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [September 20, 2024, 9:16pm UTC](https://forum.sovol3d.com/t/sv07-print-error-print-setting/5704/2 "2024-09-20T21:16:17Z")
It’s a little hard to tell from just that small sample. It’s either a dirty bed or your Z-Offset is a little too high. It looks like that corner is not sticking. Try cleaning your bed with soap (Dawn) & water and try again. ---
**Author:** ![zaberwolfi](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/zaberwolfi/32/2019_2.png) [@zaberwolfi](https://forum.sovol3d.com/u/zaberwolfi)\ **Post date:** [September 21, 2024, 3:40pm UTC](https://forum.sovol3d.com/t/sv07-print-error-print-setting/5704/3 "2024-09-21T15:40:28Z")
Problem solved , Bett Temp. to 65° , Filament to 225° new Bett leveling . The eSUN HS Filament need this. Wolfgang