# SV07 Plus just shut off mid operation **URL:** \ **Category:** Sovol SV07 Plus\ **Created:** [April 14, 2025, 2:02pm UTC](https://forum.sovol3d.com/t/sv07-plus-just-shut-off-mid-operation/7514 "2025-04-14T14:02:24Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![Bsykes13](https://avatars.discourse-cdn.com/v4/letter/b/a3d4f5/32.png) [@Bsykes13](https://forum.sovol3d.com/u/Bsykes13)\ **Post date:** [April 14, 2025, 2:02pm UTC](https://forum.sovol3d.com/t/sv07-plus-just-shut-off-mid-operation/7514/1 "2025-04-14T14:02:24Z")
Have owned printer for about a week and had several successful prints. Started a print last night and upon waking printer had stopped mid operation and restarted itself. Power cycled the printer and was able to change filament and print a small test print. The printer then started a new print and shut off right away. Now the printer will not turn back on. Any thoughts?? ---
**Author:** ![tingo](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/tingo/32/1731_2.png) [@tingo](https://forum.sovol3d.com/u/tingo)\ **Post date:** [April 14, 2025, 4:14pm UTC](https://forum.sovol3d.com/t/sv07-plus-just-shut-off-mid-operation/7514/2 "2025-04-14T16:14:04Z")
Overheating? Trouble with the power supply? Bad cables or connections? You need to do a bit more troubleshooting. ---
**Author:** ![Bsykes13](https://avatars.discourse-cdn.com/v4/letter/b/a3d4f5/32.png) [@Bsykes13](https://forum.sovol3d.com/u/Bsykes13)\ **Post date:** [April 14, 2025, 4:43pm UTC](https://forum.sovol3d.com/t/sv07-plus-just-shut-off-mid-operation/7514/3 "2025-04-14T16:43:41Z")
Tried 2 separate power cables with no result. Fuse was tested with multimeter and passed. Moved printer to a different room and it turned on, but is shutting down when attempting to heat the extruder or bed. Any thoughts? ---
**Author:** ![Bsykes13](https://avatars.discourse-cdn.com/v4/letter/b/a3d4f5/32.png) [@Bsykes13](https://forum.sovol3d.com/u/Bsykes13)\ **Post date:** [April 14, 2025, 6:55pm UTC](https://forum.sovol3d.com/t/sv07-plus-just-shut-off-mid-operation/7514/4 "2025-04-14T18:55:31Z")
After sending earlier message, i have been unable to turn on printer. Any additional troubleshooting steps to perform? ---
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [April 14, 2025, 8:06pm UTC](https://forum.sovol3d.com/t/sv07-plus-just-shut-off-mid-operation/7514/5 "2025-04-14T20:06:08Z")
The “shuts down on heater load” followed by nothing at all sounds like a failed power supply. Measure input volts at screw terminals on the motherboard. Also the sniff test can be helpful. Sniff the fan opening on the PS. If it smells like an electrical fire… ---
**Author:** ![Bsykes13](https://avatars.discourse-cdn.com/v4/letter/b/a3d4f5/32.png) [@Bsykes13](https://forum.sovol3d.com/u/Bsykes13)\ **Post date:** [April 14, 2025, 8:34pm UTC](https://forum.sovol3d.com/t/sv07-plus-just-shut-off-mid-operation/7514/6 "2025-04-14T20:34:09Z")
So there is a very noticable smell coming from the fan opening and thought this might be cause. I have only owned the printer since the 3rd of april where it was purchase new from microcenter, am i liable for the power supply? ---
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [April 14, 2025, 8:43pm UTC](https://forum.sovol3d.com/t/sv07-plus-just-shut-off-mid-operation/7514/7 "2025-04-14T20:43:08Z")
Open a ticket with @sovol3d Or buy a higher quality unit for $35 and put the genuine Sovol one on eBay a month from now when it finally gets here. [https://www.amazon.com/MEAN-WELL-LRS-350-24-Printer-Industrial/dp/B07VRK86SP/ref=sr\_1\_7?crid=1W7UT8AYERITA&dib=eyJ2IjoiMSJ9.PZ6bn3-RVLlZZCz2fvNo25BdEQZDWb7k2N8\_1jY9XDZN50C5EGB6ksVhfUGP6AwnOns6srBXn3wlVDNSDt334UgCYqwWf1adU4qP7nZWFXsvCXyQnnDic0ZFjUXVzFyJqrU-aOnXEDACOAd2VEtULAg2GvU18pBT0R7Jqhfg9v8yPnkE7zFdGL0Ks4ed0vjwWjziKdq9ivTnslI4sHlpbnTIh5AyXcASkw1jVHT4BlM.M0T1OES08tIHGuHCRSTA1p4MxLDdRzJn8tJN3dsqYiA&dib\_tag=se&keywords=mean%2Bwell%2B24v%2Bpower%2Bsupply&qid=1744663145&sprefix=mean%2Bwe%2Caps%2C186&sr=8-7&th=1](https://www.amazon.com/MEAN-WELL-LRS-350-24-Printer-Industrial/dp/B07VRK86SP/ref=sr_1_7?crid=1W7UT8AYERITA&dib=eyJ2IjoiMSJ9.PZ6bn3-RVLlZZCz2fvNo25BdEQZDWb7k2N8_1jY9XDZN50C5EGB6ksVhfUGP6AwnOns6srBXn3wlVDNSDt334UgCYqwWf1adU4qP7nZWFXsvCXyQnnDic0ZFjUXVzFyJqrU-aOnXEDACOAd2VEtULAg2GvU18pBT0R7Jqhfg9v8yPnkE7zFdGL0Ks4ed0vjwWjziKdq9ivTnslI4sHlpbnTIh5AyXcASkw1jVHT4BlM.M0T1OES08tIHGuHCRSTA1p4MxLDdRzJn8tJN3dsqYiA&dib_tag=se&keywords=mean%2Bwell%2B24v%2Bpower%2Bsupply&qid=1744663145&sprefix=mean%2Bwe%2Caps%2C186&sr=8-7&th=1) ---
**Author:** ![Bsykes13](https://avatars.discourse-cdn.com/v4/letter/b/a3d4f5/32.png) [@Bsykes13](https://forum.sovol3d.com/u/Bsykes13)\ **Post date:** [April 14, 2025, 9:00pm UTC](https://forum.sovol3d.com/t/sv07-plus-just-shut-off-mid-operation/7514/8 "2025-04-14T21:00:04Z")
[@sovol3d](https://forum.sovol3d.com/u/sovol3d) - need help with failed power supply after 2 weeks of ownership. Printer shut off mid operation during print last night. ---
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [April 14, 2025, 9:22pm UTC](https://forum.sovol3d.com/t/sv07-plus-just-shut-off-mid-operation/7514/9 "2025-04-14T21:22:31Z")
Send a message here [https://www.sovol3d.com/pages/help-center](https://www.sovol3d.com/pages/help-center) Include serial number of your printer. ---
**Author:** ![sovol3d](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/sovol3d/32/9_2.png) [@sovol3d](https://forum.sovol3d.com/u/sovol3d)\ **Post date:** [April 17, 2025, 7:27am UTC](https://forum.sovol3d.com/t/sv07-plus-just-shut-off-mid-operation/7514/10 "2025-04-17T07:27:38Z")
Have you received the reply from the after-sales team? If not, please send me the order number and e-mail account to me by message. ---
**Author:** ![Bsykes13](https://avatars.discourse-cdn.com/v4/letter/b/a3d4f5/32.png) [@Bsykes13](https://forum.sovol3d.com/u/Bsykes13)\ **Post date:** [April 18, 2025, 12:07am UTC](https://forum.sovol3d.com/t/sv07-plus-just-shut-off-mid-operation/7514/11 "2025-04-18T00:07:13Z")
Good evening, do you want information of printer I returned or the printer that I just purchased directly from your website?