# SV07 Plus Error Messages

**URL:** <https://forum.sovol3d.com/t/sv07-plus-error-messages/3653>\
**Category:** Sovol SV07 Plus\
**Tags:** display-corruption, leveling\
**Created:** [October 11, 2023, 11:18pm UTC](https://forum.sovol3d.com/t/sv07-plus-error-messages/3653 "2023-10-11T23:18:00Z")\
**Posts on this page:** 1\
**Showing post:** 67

<div class="post-metadata">

**Author:** ![FuNx](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/funx/32/1339_2.png) [@FuNx](https://forum.sovol3d.com/u/FuNx)\
**Post date:** [November 17, 2023, 6:21am UTC](https://forum.sovol3d.com/t/sv07-plus-error-messages/3653/67 "2023-11-17T06:21:35Z")

</div>

You can reflash the chip directly with an EMMC to usb adapter, there’s links to one in this post: [MKS board inside](https://forum.sovol3d.com/t/mks-board-inside/3384)

Had to do this myself after I stupidly bricked my printer a second time and even harder than the first. As far as I’m concerned “update” = “kill printer”

On the bright side I’ve gotten so much practice bringing it back from the dead I’m no longer worried about it happening again.

---

_[View the full topic](https://forum.sovol3d.com/t/sv07-plus-error-messages/3653)._