# SV07 Filament transportmotor transportiert nich richtig

**URL:** <https://forum.sovol3d.com/t/sv07-filament-transportmotor-transportiert-nich-richtig/6047>\
**Category:** Sovol SV07 Plus\
**Created:** [November 19, 2024, 10:57am UTC](https://forum.sovol3d.com/t/sv07-filament-transportmotor-transportiert-nich-richtig/6047 "2024-11-19T10:57:35Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![zaberwolfi](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/zaberwolfi/32/2019_2.png) [@zaberwolfi](https://forum.sovol3d.com/u/zaberwolfi)\
**Post date:** [November 19, 2024, 10:57am UTC](https://forum.sovol3d.com/t/sv07-filament-transportmotor-transportiert-nich-richtig/6047/1 "2024-11-19T10:57:35Z")

</div>

Habe den SV07 Plus im August gekauft. Nun Tranportiert der Filament Motor nicht mehr richtig.  
Der motor brummt und am das Rad vorne dreht nicht mehr richtig. Was ist möglich  
Wolfgang

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [November 19, 2024, 12:18pm UTC](https://forum.sovol3d.com/t/sv07-filament-transportmotor-transportiert-nich-richtig/6047/2 "2024-11-19T12:18:25Z")

</div>

> [@zaberwolfi](#):
>
> I bought the SV07 Plus in August. Now the filament motor no longer transports properly.  
> The engine hums and the front wheel no longer turns properly. What is possible  
> wolfgang

Sounds like you might have a nozzle clog or filament stuck in the extruder gears.  
Have you looked into these…??

---

<div class="post-metadata">

**Author:** ![zaberwolfi](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/zaberwolfi/32/2019_2.png) [@zaberwolfi](https://forum.sovol3d.com/u/zaberwolfi)\
**Post date:** [November 19, 2024, 12:44pm UTC](https://forum.sovol3d.com/t/sv07-filament-transportmotor-transportiert-nich-richtig/6047/3 "2024-11-19T12:44:09Z")

</div>

Yes, everything is done. The motor hums sometimes and if you touch the front wheel lightly, the motor shakes and makes humming noises.  
This means that the filament is not transported. No power

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [November 19, 2024, 2:30pm UTC](https://forum.sovol3d.com/t/sv07-filament-transportmotor-transportiert-nich-richtig/6047/4 "2024-11-19T14:30:15Z")

</div>

Open a ticket with Sovol: [info@sovol3d.com](mailto:info@sovol3d.com)  
They will probably ask you for pics & a video.

---

<div class="post-metadata">

**Author:** ![tingo](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/tingo/32/1731_2.png) [@tingo](https://forum.sovol3d.com/u/tingo)\
**Post date:** [November 19, 2024, 4:21pm UTC](https://forum.sovol3d.com/t/sv07-filament-transportmotor-transportiert-nich-richtig/6047/5 "2024-11-19T16:21:36Z")

</div>

In addition to Lion’s good advice, here are a few other things you can check (if not done already)

- loose connector / damaged wiring to the motor (also check the other end of the wiring)
- loose extruder gear (it can turn without the axle on the motor turning)