# SV06 wont bed level

**URL:** <https://forum.sovol3d.com/t/sv06-wont-bed-level/846>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [November 21, 2022, 7:17pm UTC](https://forum.sovol3d.com/t/sv06-wont-bed-level/846 "2022-11-21T19:17:49Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![sovol3delger](https://avatars.discourse-cdn.com/v4/letter/s/4bbf92/32.png) [@sovol3delger](https://forum.sovol3d.com/u/sovol3delger)\
**Post date:** [November 21, 2022, 7:17pm UTC](https://forum.sovol3d.com/t/sv06-wont-bed-level/846/1 "2022-11-21T19:17:49Z")

</div>

When I click the bed level it moves to position 1 then stops. The sensor does not drop down.

> **[New video by Alex Elger](https://photos.app.goo.gl/v5R4hUqknDPptg2k7)**

What am I doing wrong?

Also my offset is about -7.11 is that right?!?

Thanks

---

<div class="post-metadata">

**Author:** ![sovol3delger](https://avatars.discourse-cdn.com/v4/letter/s/4bbf92/32.png) [@sovol3delger](https://forum.sovol3d.com/u/sovol3delger)\
**Post date:** [November 22, 2022, 4:39pm UTC](https://forum.sovol3d.com/t/sv06-wont-bed-level/846/2 "2022-11-22T16:39:04Z")

</div>

So, after resetting the settings and running through the leveling procedure it seems to have worked.

---

<div class="post-metadata">

**Author:** ![Pankonen](https://avatars.discourse-cdn.com/v4/letter/p/e274bd/32.png) [@Pankonen](https://forum.sovol3d.com/u/Pankonen)\
**Post date:** [March 27, 2023, 12:00am UTC](https://forum.sovol3d.com/t/sv06-wont-bed-level/846/3 "2023-03-27T00:00:12Z")

</div>

I had the same problem and fix, happy printing!