# SV06 with Ultimaker Cura on Ubuntu Linux

**URL:** <https://forum.sovol3d.com/t/sv06-with-ultimaker-cura-on-ubuntu-linux/1433>\
**Category:** Slicer Questions\
**Created:** [January 26, 2023, 3:31am UTC](https://forum.sovol3d.com/t/sv06-with-ultimaker-cura-on-ubuntu-linux/1433 "2023-01-26T03:31:28Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![brianpeiris](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/brianpeiris/32/504_2.png) [@brianpeiris](https://forum.sovol3d.com/u/brianpeiris)\
**Post date:** [January 26, 2023, 3:31am UTC](https://forum.sovol3d.com/t/sv06-with-ultimaker-cura-on-ubuntu-linux/1433/1 "2023-01-26T03:31:28Z")

</div>

Just wanted to leave instructions here for the community, since it took me a while to figure this out myself.  
Initially Ultimaker would not recognize my SV06 connected via USB on Ubuntu 22.04 linux. I had to build and install drivers for the CH340 serial converter for it to work. The driver and instructions are available on GitHub: [GitHub - juliagoda/CH341SER: CH341SER driver with fixed bug](https://github.com/juliagoda/CH341SER#tutorial-on-ubuntu)

I found this via SparkFun’s website: [How to Install CH340 Drivers - SparkFun Learn](https://learn.sparkfun.com/tutorials/how-to-install-ch340-drivers/all#linux)

As the GitHub instructions say, I also had to uninstall brltty with `sudo apt remove brltty`

Once this was done, Ultimaker recognized the SV06 and I could print via USB without issues.