# SV06 (with Sovol Klipper Screen) won't stop layer shifting **URL:** \ **Category:** Sovol SV06 Fully Open Source 3D Printer\ **Tags:** klipper\ **Created:** [March 25, 2024, 5:52pm UTC](https://forum.sovol3d.com/t/sv06-with-sovol-klipper-screen-wont-stop-layer-shifting/4770 "2024-03-25T17:52:38Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![kyrich2003](https://avatars.discourse-cdn.com/v4/letter/k/e19b73/32.png) [@kyrich2003](https://forum.sovol3d.com/u/kyrich2003)\ **Post date:** [March 25, 2024, 5:52pm UTC](https://forum.sovol3d.com/t/sv06-with-sovol-klipper-screen-wont-stop-layer-shifting/4770/1 "2024-03-25T17:52:38Z")
I’ve had my SV06 since last fall and bought the Sovol Klipper screen and have been running it with that for about 2 months now. Had been getting PERFECT prints, then randomly last week every single print I do shifts layers throughout the print, no matter what file or settings that I change. Below are pictures of what I am talking about. I don’t run a lot of complicated prints, and for the pictures I was just trying to print simple gridfinity assets. Troubleshooting I have tried: -recalculating bed mesh, Z tilt, and Z distance -deleting + redownloading cura -changing versions of Cura (5.6 to 5.5) -changing filaments -changing nozzle out for brand new one -tightening bed screws and running a new mesh -resetting klipper screen to factory settings and recalculating input shaper, bed mesh, Z tilt, and Z distance -tuning X+Y belts -lubricating all linear bearings -installing a new hot end -tuning stepper current -changing slicers (tried orca slicer) Have hopped on reddit and the facebook support group and haven’t been able to find a solution. At a loss at this point so I appreciate any and all assistance! ![IMG_0677](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/7/7cc3299e04a550db9a8887566bb22fc20e9c52be.jpeg)