# SV06 Plus SAVE\_VARIABLE Klipper error

**URL:** <https://forum.sovol3d.com/t/sv06-plus-save-variable-klipper-error/4245>\
**Category:** Sovol SV06 Plus\
**Tags:** firmware, advice\
**Created:** [January 7, 2024, 11:25pm UTC](https://forum.sovol3d.com/t/sv06-plus-save-variable-klipper-error/4245 "2024-01-07T23:25:04Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![EzraB](https://avatars.discourse-cdn.com/v4/letter/e/5daacb/32.png) [@EzraB](https://forum.sovol3d.com/u/EzraB)\
**Post date:** [January 7, 2024, 11:25pm UTC](https://forum.sovol3d.com/t/sv06-plus-save-variable-klipper-error/4245/1 "2024-01-07T23:25:04Z")

</div>

I got my SV06 Plus running Klipper with the SOVOL Klipper screen. I’ve had it for about two weeks and after a few days every time I tried to start a print it would show this error:

 ![IMG_2339](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/4/4bfe7fbedc727268cdae8b4b76f5c0320a3f21bd.jpeg)  
I have tried reinstalling the firmware, reseting the screen, reseting the Klipper configuration, and nothing worked. I even returned the screen and got a knew one with no success. The most I have been able to do is print a pre sliced benchy from SOVOL’s website. If anyone knows how to fix this or has any ideas please help.

---

<div class="post-metadata">

**Author:** ![rrlehman](https://avatars.discourse-cdn.com/v4/letter/r/e9bcb4/32.png) [@rrlehman](https://forum.sovol3d.com/u/rrlehman)\
**Post date:** [January 14, 2024, 1:11am UTC](https://forum.sovol3d.com/t/sv06-plus-save-variable-klipper-error/4245/2 "2024-01-14T01:11:41Z")

</div>

You are not alone on this. I just installed my klipper screen to the SV06+ today and am getting this on one of the items I modified in the slicer (just mirroring an item) and reslicing. I use PruSlicer with a Klipper configuration file that found through these forums. I am curious how this is resolved as I am brand new to 3D printing.

---

<div class="post-metadata">

**Author:** ![Antonio](https://avatars.discourse-cdn.com/v4/letter/a/6de8d8/32.png) [@Antonio](https://forum.sovol3d.com/u/Antonio)\
**Post date:** [March 28, 2025, 8:32pm UTC](https://forum.sovol3d.com/t/sv06-plus-save-variable-klipper-error/4245/4 "2025-03-28T20:32:17Z")

</div>

Did this ever get resolved ? I have the same error on an SV08 that was working great and then just refused to boot.  
I am posting my question in SV08 category, but it sounds like the same issue.