# SV06 Plus on order

**URL:** <https://forum.sovol3d.com/t/sv06-plus-on-order/1902>\
**Category:** Sovol SV06 Plus\
**Created:** [March 8, 2023, 11:52am UTC](https://forum.sovol3d.com/t/sv06-plus-on-order/1902 "2023-03-08T11:52:16Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![wayne](https://avatars.discourse-cdn.com/v4/letter/w/0ea827/32.png) [@wayne](https://forum.sovol3d.com/u/wayne)\
**Post date:** [March 8, 2023, 11:52am UTC](https://forum.sovol3d.com/t/sv06-plus-on-order/1902/1 "2023-03-08T11:52:17Z")

</div>

Ok I have a SV06 Plus on order and it is supposed to ship in April. My question is I will be using a Raspberry PI 4B with OCTOPI. I am new to the PI world and am wondering how to connect with the PI to get plugins and firmware updates. Does the PI need additional software?

---

<div class="post-metadata">

**Author:** ![Chainsaw\_Squirrel](https://avatars.discourse-cdn.com/v4/letter/c/9de053/32.png) [@Chainsaw\_Squirrel](https://forum.sovol3d.com/u/Chainsaw_Squirrel)\
**Post date:** [March 11, 2023, 1:35am UTC](https://forum.sovol3d.com/t/sv06-plus-on-order/1902/2 "2023-03-11T01:35:14Z")

</div>

Finding a Raspberry PI is the hard part , and finding one anywhere near the normal retail price is impossible. Until normal stock levels return.  
Firmware is done with micro SDcard… but if it aint broke dont fix it. You dont “need” a PI for anything, tons of ways to run octoprint or klipper without PI. Octoprint can be ran on any computer, or a cell phone

---

<div class="post-metadata">

**Author:** ![Timpraetor](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/timpraetor/32/268_2.png) [@Timpraetor](https://forum.sovol3d.com/u/Timpraetor)\
**Post date:** [March 16, 2023, 12:47pm UTC](https://forum.sovol3d.com/t/sv06-plus-on-order/1902/3 "2023-03-16T12:47:40Z")

</div>

If you already have the Pi 4B, you can download and install OctoPi via the Rasberry Pi OS Imager. Nothing further is required. Angus has a great tutorial here:

[![](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/1X/a7751101dbc50a1490a140e4e6cb8285a8c6a821.jpeg "Octoprint Raspberry 4B + 4K webcam guide and the latest great plugins") ](https://www.youtube.com/watch?v=h--RLbvQKYc)

I use this from HardKernel and run DietPI with the OctoPrint package:

> **[ODROID-XU4 Special Price – ODROID](https://www.hardkernel.com/shop/odroid-xu4-special-price/)**

---

<div class="post-metadata">

**Author:** ![wayne](https://avatars.discourse-cdn.com/v4/letter/w/0ea827/32.png) [@wayne](https://forum.sovol3d.com/u/wayne)\
**Post date:** [March 16, 2023, 8:06pm UTC](https://forum.sovol3d.com/t/sv06-plus-on-order/1902/4 "2023-03-16T20:06:12Z")

</div>

Here is a question now. So far all the instructions I have seen are for setting up the wifi but I already have two ethernet pots there. It would be simple just to plugin the cable. Will Octo Pi and the Raspberry PI 4B automatically see it and setup?

---

<div class="post-metadata">

**Author:** ![Timpraetor](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/timpraetor/32/268_2.png) [@Timpraetor](https://forum.sovol3d.com/u/Timpraetor)\
**Post date:** [March 17, 2023, 12:28am UTC](https://forum.sovol3d.com/t/sv06-plus-on-order/1902/5 "2023-03-17T00:28:39Z")

</div>

Absolutely. I use a hardwired connection for mine.