# SV06 Plus mid print layer separation

**URL:** <https://forum.sovol3d.com/t/sv06-plus-mid-print-layer-separation/7049>\
**Category:** Sovol SV06 Plus\
**Tags:** advice\
**Created:** [February 26, 2025, 1:48pm UTC](https://forum.sovol3d.com/t/sv06-plus-mid-print-layer-separation/7049 "2025-02-26T13:48:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![payne9999](https://avatars.discourse-cdn.com/v4/letter/p/a88e4f/32.png) [@payne9999](https://forum.sovol3d.com/u/payne9999)\
**Post date:** [February 26, 2025, 1:48pm UTC](https://forum.sovol3d.com/t/sv06-plus-mid-print-layer-separation/7049/1 "2025-02-26T13:48:22Z")

</div>

Printing LW PLA and running 4 SV06 Plus printers in the shop. 3 print fine and one suddenly starts having layer separation mid print. The first part of the print has an excellent first layer and good fusion and the part is very strong. Somewhere along the way it starts to have lamination issues and the part literally falls apart in my hands while the early part of the print is very strong. I am an experienced printer and have seen and solved many problems but this one has me baffled.

Filament: SainSmart LW PLA (foaming)  
Temperature: 235C  
Bed: 60C  
Print Speed: 60mm/sec  
Printer setup: In enclosure  
Cooling: 40% (recommended by the designer)

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [February 26, 2025, 3:40pm UTC](https://forum.sovol3d.com/t/sv06-plus-mid-print-layer-separation/7049/2 "2025-02-26T15:40:56Z")

</div>

If all the settings are the same for each printer…  
I would look at the nozzle, either it’s partially clogged or needs to be replaced.  
The only _other_ thing I can think of is a bad cooling fan.