# SV06 Plus heatbreak issue

**URL:** <https://forum.sovol3d.com/t/sv06-plus-heatbreak-issue/5052>\
**Category:** Sovol SV06 Plus\
**Tags:** extruder-kit, advice\
**Created:** [May 22, 2024, 1:33am UTC](https://forum.sovol3d.com/t/sv06-plus-heatbreak-issue/5052 "2024-05-22T01:33:49Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![EzraB](https://avatars.discourse-cdn.com/v4/letter/e/5daacb/32.png) [@EzraB](https://forum.sovol3d.com/u/EzraB)\
**Post date:** [May 22, 2024, 1:33am UTC](https://forum.sovol3d.com/t/sv06-plus-heatbreak-issue/5052/1 "2024-05-22T01:33:49Z")

</div>

So, I have a few issues. I swapped my nozzle when I found a leak. I decided to take off the hotend and the heatbreak stayed in the extruder.

 ![IMG_1227](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/1/1dcabd6bd759e4a00acad8c40da89357bf6f19b9.jpeg)  
This isn’t a big deal, I could just get a new extruder, but two of the three screws holding the extruder to the blue mount are severely stripped. I tried to get one of the screws out with a screw extractor but I ended up destroying it. Is there a way to get a new blue mounting piece? Could I melt the old extruder off? Even if I could print the mounting piece, I don’t have a heat insert tool. If anyone has any advice at all I’d love to hear it. Thanks!