# SV06 Plus faulty power supply switch **URL:** \ **Category:** Sovol SV06 Plus\ **Created:** [June 24, 2023, 3:48am UTC](https://forum.sovol3d.com/t/sv06-plus-faulty-power-supply-switch/2922 "2023-06-24T03:48:16Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![BPLA](https://avatars.discourse-cdn.com/v4/letter/b/839c29/32.png) [@BPLA](https://forum.sovol3d.com/u/BPLA)\ **Post date:** [June 24, 2023, 3:48am UTC](https://forum.sovol3d.com/t/sv06-plus-faulty-power-supply-switch/2922/1 "2023-06-24T03:48:16Z")
About 2 weeks in to using my new SV06 plus, it’s been working pretty well after a small extruder problem (resolved with no help from customer support), and now the switch on the power supply is acting up. Sometimes it won’t turn on, sometimes it won’t turn off, and it’ll sometimes shut off mid print. I don’t know where to go from here. Can anyone help me out? Thanks in advance ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [June 24, 2023, 10:08am UTC](https://forum.sovol3d.com/t/sv06-plus-faulty-power-supply-switch/2922/2 "2023-06-24T10:08:45Z")
> [@Power switch starting to bug](https://forum.sovol3d.com/t/power-switch-starting-to-bug/2711): > > hey i started having issue with my SV06 plus turning off rnadomly yesterday and today when i try to turn it on it just gets power for a few sec then turns back off. after some invertigations i found that keeping the switch pushed in la lite when opening the machine seem to work. anyone got this issue? could it create a short long term, or any other problems? ill be looking for the part number to replace it anyway, if anyone has it. thanks! ---
**Author:** ![dwtc3d](https://avatars.discourse-cdn.com/v4/letter/d/77aa72/32.png) [@dwtc3d](https://forum.sovol3d.com/u/dwtc3d)\ **Post date:** [June 24, 2023, 11:44pm UTC](https://forum.sovol3d.com/t/sv06-plus-faulty-power-supply-switch/2922/3 "2023-06-24T23:44:24Z")
My switch went bad after a few times using it. I got a replacement switch from Amazon. Been fine since. You could probably go through support too. But that will take weeks to get a switch. ---
**Author:** ![BPLA](https://avatars.discourse-cdn.com/v4/letter/b/839c29/32.png) [@BPLA](https://forum.sovol3d.com/u/BPLA)\ **Post date:** [June 25, 2023, 1:41am UTC](https://forum.sovol3d.com/t/sv06-plus-faulty-power-supply-switch/2922/5 "2023-06-25T01:41:30Z")
Would you mind sharing the Amazon link to the switch? ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [June 25, 2023, 10:46am UTC](https://forum.sovol3d.com/t/sv06-plus-faulty-power-supply-switch/2922/6 "2023-06-25T10:46:13Z")
It’s in the thread I posted above. ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [September 28, 2023, 6:18pm UTC](https://forum.sovol3d.com/t/sv06-plus-faulty-power-supply-switch/2922/7 "2023-09-28T18:18:17Z")
Alright, I just had to replace the switch in my SV06 Plus. I turned it off & heard it sparking, turned it on & off 3-4 more time…did it every time. I did notice 1 time the switch lit up, I don’t remember ever seeing that before, none of my other switches light up. I used the switch above that I posted. I did not use the wires that came with the switch, they were a smaller gauge wire. Turned printer on & off 3-4 times & no more sparking. I didn’t have to replace any wire or terminals, everything fit fine. The sparking wire was a little brown at the terminal cover, but the wire was fine. So yes, these switches work fine as a replacement.