# SV06 Plus Extruder Grub Screw

**URL:** <https://forum.sovol3d.com/t/sv06-plus-extruder-grub-screw/4704>\
**Category:** Sovol SV06 Plus\
**Created:** [March 14, 2024, 5:06pm UTC](https://forum.sovol3d.com/t/sv06-plus-extruder-grub-screw/4704 "2024-03-14T17:06:56Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![ChelseaKev76](https://avatars.discourse-cdn.com/v4/letter/c/e5b9ba/32.png) [@ChelseaKev76](https://forum.sovol3d.com/u/ChelseaKev76)\
**Post date:** [March 14, 2024, 5:06pm UTC](https://forum.sovol3d.com/t/sv06-plus-extruder-grub-screw/4704/1 "2024-03-14T17:06:56Z")

</div>

Hi all, just got my 3D Printer, complete newbie to 3D Printing.

Have setup the printer, have 2 questions the manual says I need to tighten the grub screw in the Extruder ? Is this correct ?

Secondly the cable going to the filament holder is very tight is this also the case ?

Regards Kevin