# SV06 Plus ACE Klipper macros

**URL:** <https://forum.sovol3d.com/t/sv06-plus-ace-klipper-macros/7703>\
**Category:** Sovol SV06 Plus ACE\
**Created:** [May 1, 2025, 8:40pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-klipper-macros/7703 "2025-05-01T20:40:33Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![IvanHor](https://avatars.discourse-cdn.com/v4/letter/i/db5fbb/32.png) [@IvanHor](https://forum.sovol3d.com/u/IvanHor)\
**Post date:** [May 1, 2025, 8:40pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-klipper-macros/7703/1 "2025-05-01T20:40:33Z")

</div>

Hi,  
I’ve just bought this excellent printer, and found that  
a) Orca Slicer 2.3.0 presets exists only for 0.4 nozzle  
b) Klipper macros for ACE are almost impossible to find  
c) gerGO [https://www.youtube.com/watch?v=R1-VU01-9Es](https://www.youtube.com/watch?v=R1-VU01-9Es) adaptation of Christian Vick’s  
macros throws errors about homing\_override and z\_probe  
Any help would be highly appreciated.

---

<div class="post-metadata">

**Author:** ![jbob](https://avatars.discourse-cdn.com/v4/letter/j/b487fb/32.png) [@jbob](https://forum.sovol3d.com/u/jbob)\
**Post date:** [May 1, 2025, 11:04pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-klipper-macros/7703/2 "2025-05-01T23:04:27Z")

</div>

I can’t speak to gerGo’s link, but for Orca, see this link [https://github.com/Sovol3d/Sovol-OrcaSlicer](https://github.com/Sovol3d/Sovol-OrcaSlicer).

---

<div class="post-metadata">

**Author:** ![IvanHor](https://avatars.discourse-cdn.com/v4/letter/i/db5fbb/32.png) [@IvanHor](https://forum.sovol3d.com/u/IvanHor)\
**Post date:** [May 2, 2025, 2:30pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-klipper-macros/7703/3 "2025-05-02T14:30:51Z")

</div>

I found it, looks great, but how to get it to my installation of Orca? What synchronize means and how to do it, where to look for instructions? I’m not lazy, it’s my first encounter with Klipper and Git, any help is appreciated and welcome. TIA.

---

<div class="post-metadata">

**Author:** ![jbob](https://avatars.discourse-cdn.com/v4/letter/j/b487fb/32.png) [@jbob](https://forum.sovol3d.com/u/jbob)\
**Post date:** [May 2, 2025, 9:36pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-klipper-macros/7703/4 "2025-05-02T21:36:02Z")

</div>

[https://github.com/Sovol3d/Sovol-OrcaSlicer/blob/main/Windows%20Import%20Orcaslicer%20Tutorial.pdf](https://github.com/Sovol3d/Sovol-OrcaSlicer/blob/main/Windows%20Import%20Orcaslicer%20Tutorial.pdf)

That is the PDF file from their github. It gives the basics on how to get the profile for Orca. I am new to Klipper myself, but from what I’ve seen, you don’t need to understand Klipper to use the machine. Once you get it setup in Orca, it’s pretty straight forward.