# SV06 Plus ACE Github repository

**URL:** <https://forum.sovol3d.com/t/sv06-plus-ace-github-repository/7192>\
**Category:** Sovol SV06 Plus ACE\
**Created:** [March 13, 2025, 4:55am UTC](https://forum.sovol3d.com/t/sv06-plus-ace-github-repository/7192 "2025-03-13T04:55:16Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![psychedup74](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/psychedup74/32/2851_2.png) [@psychedup74](https://forum.sovol3d.com/u/psychedup74)\
**Post date:** [March 13, 2025, 4:55am UTC](https://forum.sovol3d.com/t/sv06-plus-ace-github-repository/7192/1 "2025-03-13T04:55:16Z")

</div>

Just checking if anyone can share the link to the Github repository for the SV06 Plus ACE.

I screwed up my klipper install, so need to revert back to the original.

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [March 13, 2025, 6:37am UTC](https://forum.sovol3d.com/t/sv06-plus-ace-github-repository/7192/2 "2025-03-13T06:37:05Z")

</div>

Right now, there isn’t one…but it will show [here](https://github.com/Sovol3d?tab=repositories) when there is.  
Same with the [Wiki](https://wiki.sovol3d.com/en/SV06-PLUS-ACE).

For now you will have to put in a ticket [info@sovol3d.com](mailto:info@sovol3d.com)

@sovol3d

---

<div class="post-metadata">

**Author:** ![Oliver](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/oliver/32/2593_2.png) [@Oliver](https://forum.sovol3d.com/u/Oliver)\
**Post date:** [March 13, 2025, 8:31pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-github-repository/7192/3 "2025-03-13T20:31:12Z")

</div>

The wiki page is superfluous. It only links to the old Orca profiles. [The current Orca profiles](https://github.com/Sovol3d/Sovol-OrcaSlicer) are available on GitHub. Nothing else about the SV06 Plus ACE is available on GitHub so far.

---

<div class="post-metadata">

**Author:** ![psychedup74](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/psychedup74/32/2851_2.png) [@psychedup74](https://forum.sovol3d.com/u/psychedup74)\
**Post date:** [March 14, 2025, 4:09am UTC](https://forum.sovol3d.com/t/sv06-plus-ace-github-repository/7192/4 "2025-03-14T04:09:07Z")

</div>

My problem seemed to fix itself. After making some config changes I was getting an error that it couldn’t connect to the mcu. Restarting Klipper or Firmware didn’t help, rebooting the whole machine didn’t help. But after shutting it off completely and then bringing it back up, everything started working again.