# SV06 Plus ACE dual 5015 fan duct **URL:** \ **Category:** Sovol SV06 Plus ACE\ **Created:** [May 1, 2025, 8:46pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704 "2025-05-01T20:46:35Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![IvanHor](https://avatars.discourse-cdn.com/v4/letter/i/db5fbb/32.png) [@IvanHor](https://forum.sovol3d.com/u/IvanHor)\ **Post date:** [May 1, 2025, 8:46pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/1 "2025-05-01T20:46:35Z")
hi, has anyone seen anywhere dual 5015 fan duct for ACE similar to versions for SV06? I searched everywhere, even used AI but no results. Unfortunately I have no necessary skills to design my own in 3D CAD. ---
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [May 1, 2025, 9:21pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/2 "2025-05-01T21:21:20Z")
Ace has 2.6x the fan the SV06 did out of the box… 40x10 has an impeller about 6mm wide the 40x20 about 16. Why do you need dual fans? ---
**Author:** ![IvanHor](https://avatars.discourse-cdn.com/v4/letter/i/db5fbb/32.png) [@IvanHor](https://forum.sovol3d.com/u/IvanHor)\ **Post date:** [May 1, 2025, 10:48pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/3 "2025-05-01T22:48:53Z")
Because part cooling of specifically overhangs is not to my liking, otherwise for the same reason why users of SV06 also needed one or two. ---
**Author:** ![IvanHor](https://avatars.discourse-cdn.com/v4/letter/i/db5fbb/32.png) [@IvanHor](https://forum.sovol3d.com/u/IvanHor)\ **Post date:** [May 1, 2025, 10:50pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/4 "2025-05-01T22:50:39Z")
P.S. I want to be able to see the nozzle too. ---
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [May 1, 2025, 11:19pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/5 "2025-05-01T23:19:34Z")
![image](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/6/670bdf8674064dfa751ca63d7b25dcacfcb57e82.jpeg) Ace uses the same core extruder as the SV06+ Send a link to a design you like ---
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [May 2, 2025, 12:05am UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/6 "2025-05-02T00:05:33Z")
![image](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/b/b534b55e7817c50f853c723cdd4ab42ed960c7dc.jpeg) Almost fits ---
**Author:** ![IvanHor](https://avatars.discourse-cdn.com/v4/letter/i/db5fbb/32.png) [@IvanHor](https://forum.sovol3d.com/u/IvanHor)\ **Post date:** [May 2, 2025, 7:41am UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/7 "2025-05-02T07:41:28Z")
Thank you, this one looks promising.Where to find it? ---
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [May 2, 2025, 1:54pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/8 "2025-05-02T13:54:48Z")
It is only a concept. A SV06 design held up to the Ace extruder. Fan hits the power supply about 22 mm before the toolhead gets to the stop. Not useable. ---
**Author:** ![IvanHor](https://avatars.discourse-cdn.com/v4/letter/i/db5fbb/32.png) [@IvanHor](https://forum.sovol3d.com/u/IvanHor)\ **Post date:** [May 2, 2025, 2:19pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/9 "2025-05-02T14:19:47Z")
Thank you, some 3D CAD guru will sure find a solution, only if enough people become interested. Wait and hope. ---
**Author:** ![jbob](https://avatars.discourse-cdn.com/v4/letter/j/b487fb/32.png) [@jbob](https://forum.sovol3d.com/u/jbob)\ **Post date:** [May 2, 2025, 9:42pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/10 "2025-05-02T21:42:48Z")
How many parts are re-used from the SV06+? Didn’t see any cad files on the github page for the plus ace. ---
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [May 2, 2025, 10:04pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/11 "2025-05-02T22:04:11Z")
I’m using the model from Github for the Ace (no plus) Same layout for everything except for the length of the extrusions. If a fan will fit the non + it will fit the plus The power supply is a pain in the ass. When the toolhead is against the stop the centerline is only about 18mm inside the PS mount. A little more room on the right but I like symmetry so I’ve been concepting with a width constraint of 30mm ![image](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/1/149888bfef610a3e7861152b10ad6c676aefac2d.jpeg) Now I’m trying to sneak through between the X rails and the uprights. It can fit but the belt anchor has to be one with the duct ---
**Author:** ![jbob](https://avatars.discourse-cdn.com/v4/letter/j/b487fb/32.png) [@jbob](https://forum.sovol3d.com/u/jbob)\ **Post date:** [May 2, 2025, 11:00pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/12 "2025-05-02T23:00:39Z")
Thanks, maybe I’ll grab the sv06/6+ files and pull some measurements. ---
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [May 3, 2025, 2:17am UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/13 "2025-05-03T02:17:51Z")
This is the Ace forum Ace is quite a bit different than the original SV06 and SV06+ The Ace twins do have the same hot end as the SV06+ but fans and the rest of the machine are different. The Ace plus Github doesn’t have step models. ---
**Author:** ![jbob](https://avatars.discourse-cdn.com/v4/letter/j/b487fb/32.png) [@jbob](https://forum.sovol3d.com/u/jbob)\ **Post date:** [May 3, 2025, 10:49am UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/14 "2025-05-03T10:49:55Z")
Understood, was meaning I could grab existing geometry from a similar machine and modify it to match the ace plus rather then start from scratch. Was this the one you originally posted? [https://www.printables.com/model/438570-sovol-sv06-plus-5015-dual-fan-mount](https://www.printables.com/model/438570-sovol-sv06-plus-5015-dual-fan-mount) ---
**Author:** ![IvanHor](https://avatars.discourse-cdn.com/v4/letter/i/db5fbb/32.png) [@IvanHor](https://forum.sovol3d.com/u/IvanHor)\ **Post date:** [May 3, 2025, 1:12pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/15 "2025-05-03T13:12:15Z")
here is ACE Plus step file > Hope it helps. ---
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [May 3, 2025, 4:49pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/16 "2025-05-03T16:49:56Z")
> [@jbob](#): > > Understood, was meaning I could grab existing geometry from a similar machine and modify it to match the ace plus rather then start from scratch. Was this the one you originally posted? > > [Sovol SV06 Plus 5015 dual fan mount by DaddyWazzy\_TheCreator | Download free STL model | Printables.com](https://www.printables.com/model/438570-sovol-sv06-plus-5015-dual-fan-mount) That is a remix of the teaser I sent. It won’t, however remotely fit the ace unless your willing to five up 50mm of travel on the X axis ---
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [May 3, 2025, 9:56pm UTC](https://forum.sovol3d.com/t/sv06-plus-ace-dual-5015-fan-duct/7704/17 "2025-05-03T21:56:58Z")
How close, on the Z axis, do you like your duct to be? ![image](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/e/ebf48aaf052cee862f3f38131a722abab9f0ee48.jpeg)