# Sv06 - please enable "host action commands" in firmware

**URL:** <https://forum.sovol3d.com/t/sv06-please-enable-host-action-commands-in-firmware/859>\
**Category:** General Chatting\
**Created:** [November 24, 2022, 1:13am UTC](https://forum.sovol3d.com/t/sv06-please-enable-host-action-commands-in-firmware/859 "2022-11-24T01:13:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![pingr](https://avatars.discourse-cdn.com/v4/letter/p/e95f7d/32.png) [@pingr](https://forum.sovol3d.com/u/pingr)\
**Post date:** [November 24, 2022, 1:13am UTC](https://forum.sovol3d.com/t/sv06-please-enable-host-action-commands-in-firmware/859/1 "2022-11-24T01:13:10Z")

</div>

please enable “host action commands” in firmware for sv06. I’m using octoprint and i’d like it to work both ways.

thank you

---

<div class="post-metadata">

**Author:** ![pingr](https://avatars.discourse-cdn.com/v4/letter/p/e95f7d/32.png) [@pingr](https://forum.sovol3d.com/u/pingr)\
**Post date:** [November 25, 2022, 4:37am UTC](https://forum.sovol3d.com/t/sv06-please-enable-host-action-commands-in-firmware/859/2 "2022-11-25T04:37:07Z")

</div>

to be more specific, please enable “#define HOST\_SHUTDOWN\_MENU\_ITEM”

I’d like to be able to hit cancel from my printer and have octoprint stop printing.

thank you

---

<div class="post-metadata">

**Author:** ![sovol3d](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/sovol3d/32/9_2.png) [@sovol3d](https://forum.sovol3d.com/u/sovol3d)\
**Post date:** [November 29, 2022, 1:28am UTC](https://forum.sovol3d.com/t/sv06-please-enable-host-action-commands-in-firmware/859/3 "2022-11-29T01:28:20Z")

</div>

Hi, The latest firmware version of av06 already supports octoprint and can be used directly.