# SV06 hotend temp stuck at 9° on LCD

**URL:** <https://forum.sovol3d.com/t/sv06-hotend-temp-stuck-at-9-on-lcd/3050>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [July 9, 2023, 11:39am UTC](https://forum.sovol3d.com/t/sv06-hotend-temp-stuck-at-9-on-lcd/3050 "2023-07-09T11:39:08Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [July 9, 2023, 5:08pm UTC](https://forum.sovol3d.com/t/sv06-hotend-temp-stuck-at-9-on-lcd/3050/6 "2023-07-09T17:08:19Z")

</div>

This thread might help.

> [@SV06 - Bed Heating Error](https://forum.sovol3d.com/t/sv06-bed-heating-error/1839/1):
>
> My SV06 is a few months old and now it will not heat the bed, it shows “???” were the current bed temp should be.

---

_[View the full topic](https://forum.sovol3d.com/t/sv06-hotend-temp-stuck-at-9-on-lcd/3050)._