# SV06 Heating failed

**URL:** <https://forum.sovol3d.com/t/sv06-heating-failed/3844>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [November 8, 2023, 2:32pm UTC](https://forum.sovol3d.com/t/sv06-heating-failed/3844 "2023-11-08T14:32:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![TheGingerMoose0](https://avatars.discourse-cdn.com/v4/letter/t/a4c791/32.png) [@TheGingerMoose0](https://forum.sovol3d.com/u/TheGingerMoose0)\
**Post date:** [November 8, 2023, 2:32pm UTC](https://forum.sovol3d.com/t/sv06-heating-failed/3844/1 "2023-11-08T14:32:37Z")

</div>

Earlier this morning I had a Heating Failed: Bed error message. Now I have a Heating Failed: e1 error message.

I was able to open up the control box and reseat the hotbed wires which resolved the heating failed bed problem. I was trying to swap them with the nozzle wires, but the heat bed wires weren’t long enough so that wasn’t going to work. I have quite large hands, so I couldn’t even get to the thermistor ports. As I mentioned - reseating the hotbed wires cleared that error. I was able to print a benchy. When I went to print a calibration cube I am getting a second error, heating failed e1.

Does anyone have suggestions on how to troubleshoot this error?

---

<div class="post-metadata">

**Author:** ![meicalnissyen](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@meicalnissyen](https://forum.sovol3d.com/u/meicalnissyen)\
**Post date:** [November 14, 2023, 6:24pm UTC](https://forum.sovol3d.com/t/sv06-heating-failed/3844/2 "2023-11-14T18:24:27Z")

</div>

Proly your bed died.

contact CS (amazonus sovol may be more responsive than the main, ymmv

theyll want order#, some pics, and theyll send a new bed.

You may, be able to repair it with creality bed thermistors.  
I got it to function on the bench, but not fully assembled. a new bed appeared in my mailbox and I never resolved why