# SV06 - First Time Printing PTEG - Here’s my calibration cube. Recommendations? KLIPPER

**URL:** https://forum.sovol3d.com/t/sv06-first-time-printing-pteg-here-s-my-calibration-cube-recommendations-klipper/5839
**Category:** Sovol SV06 Fully Open Source 3D Printer
**Created:** [October 20, 2024, 10:53pm UTC](https://forum.sovol3d.com/t/sv06-first-time-printing-pteg-here-s-my-calibration-cube-recommendations-klipper/5839 "2024-10-20T22:53:27Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![KLB331](https://avatars.discourse-cdn.com/v4/letter/k/e9bcb4/32.png) [@KLB331](https://forum.sovol3d.com/u/KLB331)
#### Post date: [October 20, 2024, 10:53pm UTC](https://forum.sovol3d.com/t/sv06-first-time-printing-pteg-here-s-my-calibration-cube-recommendations-klipper/5839/1 "2024-10-20T22:53:27Z")

</div>

I used the stock “generic PTEG” settings from Orca Slicer on a Klipperized Sv06 and I think it came out pretty darn good but I know there’s some stuff I can tweak but I’m not sure what they would be.

Suggestions?

(I can only post one photo so I had to pick one out of several)

 ![IMG_9623](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/3/31f36368815b3cb9d621b50b68ae1281794796c3.jpeg)

---

<div class="post-metadata">

### Author: ![KLB331](https://avatars.discourse-cdn.com/v4/letter/k/e9bcb4/32.png) [@KLB331](https://forum.sovol3d.com/u/KLB331)
#### Post date: [October 20, 2024, 10:54pm UTC](https://forum.sovol3d.com/t/sv06-first-time-printing-pteg-here-s-my-calibration-cube-recommendations-klipper/5839/2 "2024-10-20T22:54:17Z")

</div>

Here is another side

 ![IMG_9624](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/5/58dc38062acb0ec3e427e9a7a70e8296bb7d8008.jpeg)

---

<div class="post-metadata">

### Author: ![KLB331](https://avatars.discourse-cdn.com/v4/letter/k/e9bcb4/32.png) [@KLB331](https://forum.sovol3d.com/u/KLB331)
#### Post date: [October 20, 2024, 10:54pm UTC](https://forum.sovol3d.com/t/sv06-first-time-printing-pteg-here-s-my-calibration-cube-recommendations-klipper/5839/3 "2024-10-20T22:54:52Z")

</div>

Z

 ![IMG_9622](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/4/454e3cd86a4f97c265df056cd940f88808f5e696.jpeg)

---

<div class="post-metadata">

### Author: ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)
#### Post date: [October 21, 2024, 12:52am UTC](https://forum.sovol3d.com/t/sv06-first-time-printing-pteg-here-s-my-calibration-cube-recommendations-klipper/5839/4 "2024-10-21T00:52:24Z")

</div>

I’ve been saying this a lot this past week…I don’t know anything about Klipper…but I know ringing/ghosting when I see it.

[https://www.klipper3d.org/Resonance\_Compensation.html](https://www.klipper3d.org/Resonance_Compensation.html)

---

<div class="post-metadata">

### Author: ![KLB331](https://avatars.discourse-cdn.com/v4/letter/k/e9bcb4/32.png) [@KLB331](https://forum.sovol3d.com/u/KLB331)
#### Post date: [October 21, 2024, 1:48am UTC](https://forum.sovol3d.com/t/sv06-first-time-printing-pteg-here-s-my-calibration-cube-recommendations-klipper/5839/5 "2024-10-21T01:48:52Z")

</div>

I appreciate you responding even if you don’t know klipper!!

Thanks.